Swing Away Tongue Kit For A 3" x 3" Trailer Tongue
Updated 04/30/2026 | Published 04/27/2026
Products Featured in This Question
Question:
Do you still sell fhdpb330301 Fulton 3x3 bolt on swing away kit
asked by: Cody K
Expert Reply:
Hi Cody!
We do have a couple alternatives that will work the same, but the Fulton FHDPB330301 swing away kit is not currently available. It may be at some point in the future, but with their parent company (First Brands) having "issues" lately, I can't say that for sure.
So with that said, the most similar part will be the SwingKing Bolt-On Swing Tongue Kit - 3x3 - Galvanized # TD88FR. This is a bolt on application and fits a 3" x 3" tongue, just like the Fulton. It does bolt on a little differently, so keep that in mind.
The other option is the Dexter Standard Swing Tongue Kit for 3" x 3" Tongue # DX77VC. This is a weld on option, but it will also fit a 3" x 3" tongue. Bit more work for the install, but it is a lot less expensive.
What are you wanting this for? most people use them on boat trailers, but I have seen a few other things as well.
(click to enlarge)
Product Page this Question was Asked From
SwingKing Bolt-On Swing Tongue Kit - 3x3 - Galvanized
- Folding Trailer Tongue
- Coupler Hinge Kit
- Bolt-On
- 3 x 3 Inch Tongue
- Swing King
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What is the Difference Between the Fulton Fold Away Hinge HDPB330301 and HDPB330101?
- Shop: Dexter Swing-Away Coupler Hinge Kit for 3" x 4" Tongue - Weld On
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Shop: SwingKing Bolt-On Swing Tongue Kit - 3x3 - Galvanized
- Q&A: How Far Does Trailer Tongue Slide Into SwingKing Bolt-On Swing Tongue Kit
- Q&A: Fulton Fold Away Hinge Kit 3x3 Fit on Trailer Tongue that is 7-3/4 inches Long
- Q&A: Is There A Weight Capacity On The 3 x 3 Swing Away Tongue Kit?
- Q&A: How Much Play Is Expected With SwingKing Bolt-On Swing Tongue Kit TD28FR
- Q&A: Looking For Gas Strut For Stabilus Lift-O-Mat Awning 3108392.303
- Q&A: Option for Extending a 3 inch by 3 inch Trailer Tongue
- Article: Boat Trailer Guides: Which are the Best?
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: The 4 Crucial Choices You'll Make When Buying a Boat Trailer
- Article: Hand Winches
- Article: How to Bleed Your Trailer Surge Brakes
Mike
4/30/2026
Yes installed the 3x3 Swing King break away hitch on a Jet Ski trailer. It was extremely easy with normal tools. Caution on hitting wires that run through the tongue. The job enabled me to easily fit my trailer in a 12 x 16 foot shed with plenty of walk around room front and back. Heavily built unit along with easy to fold and unfold. I would recommend.