Result: Progressive Dynamics

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

Hey Michael, You're correct that it lets you see what charge mode the converter charger is in, but it also has a button on it to let you manually change the charge mode as needed. There isn't currently Bluetooth or other app capabilities at…

Thanks for the picture Floyd! No, you definitely don't want to cut the plug off. You'll wire up the Progressive Dynamics 9300 Series RV Converter Charger item #PD79RR, according to the directions I have attached below, then you'll plug it…

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

Hey Dan, actually the correct replacement for your Intertek 8355 is the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel #PD4655V. This replacement converter section is compatible with Lithium batteries along with flooded…

Hi Dell, Yes, the Furrion Automatic Transfer Switch #F50ATS can replace your PS250 50 amp transfer switch. When swapping over to the unit transfer switch you'll want to first disconnect from shore or generator power. The shore power and generator…

Hey Michael, the outlet that the Progressive Dynamics Converter part #PD89RR that you referenced plugs into the same outlet type as a 75 amp converter would plug into.

Hey Christopher, the Hydrastar Disc Brake Kit #HYD44VR is not offered with Timken bearings however you can just buy the matching Timken bearing kit separately with the Timken Bearing Kit 15123/ 25580 Bearings, 15245/25520 Races, 412920 Seal #TMK42VR.…

Your older PD9145C charger delivers 45 amps of DC charging power at 13.6 volts DC. (For AGM batteries) This converter/charger requires 725 watts of AC power to operate. It also needs to be on its own AC circuit. The Progressive Dynamics #PD79RR…

Hey Alvin, you could replace the Progressive Dynamics Inteli-Power Converter part #PD9145A with the part #PD9245C. This is a 45 amp converter just like what you have now plus it has the charge wizard! That's basically a fancy way of saying it…

I don't recommend using a higher amp converter as the converter size is based on the load of the trailer and there would be no real benefit of going with an overrated option. That said, if you want to go up 5 amps or so that shouldn't really…

Hi John; if you want to use the #PD89RR the 6 gauge won't be enough for the 80 amp output. You will need to switch to 4 gauge copper or 2 gauge aluminum wire.