Monitor and control your Inteli-Power PD9200 series converter with this status remote pendant. Manual switch lets you select the charging mode of the built-in Charge Wizard. Indicator light displays the current operating mode.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a quick look at the converter status remote pendant for Progressive Dynamics and Inteli-Power 9200 series converters.This allows you to automatically adjust, or manually adjust rather, the status that your converter has your battery in. So there's going to be several different modes and if you decide that you want to put your battery into boost mode, basically where it kind of ramps up the charging to your battery, you can manually override what the system is doing by pressing and holding the button here. And then it'll cycle through and whenever the light that little wizard is holding is full on, it's going to be in boost mode. If it's blinking, that means it's in normal mode, and if it's just short, a short flash, that means it's in storage mode.So you'll see that again in this little orb that the wizard is holding like a crystal ball. So it gives you a clear indicator of what's going on with your battery. And then if you want to change it, you can just press and hold that button until the light is doing the operation that correlates to the storage or normal mode or boost mode.It has a plug on the other side to connect to your converter.
The cable is about 30 inches long, between 25 and 30 inches long. This little remote pendant is about two inches long by about an inch and a quarter and about half an inch thick. And it does have some double sided tape at the back, some foam tape. Take off the backing here, and then we can stick it into place where we want that mounted up.This is going to just plug right into that standard accessory port on all models of our Inteli-Power 9200 series converters.And that's going to do it for our look at the converter status remote pendant for Progressive Dynamics and Inteli-Power 9200 series converters.
Average Customer Rating: 4.6 out of 5 stars (21 Customer Reviews)
Monitor and control your Inteli-Power PD9200 series converter with this status remote pendant. Manual switch lets you select the charging mode of the built-in Charge Wizard. Indicator light displays the current operating mode.The pendent (remote reader) works great to let you know the status of your converter. My coverter has a charge wizard built into it. This makes it a smart, automatic charger. However, to know exactly what mode the charger is in, one must have this pendent. It's easy to install. Just find the connection on the converter. My converter was difficult to find because of the way the converter is installed. You can use your phone camera on selfie mode and photograph it. It attaches just like a telephone jack. I have attached photos of the connection point and the mounted pendant. It works great.
Couldn't be happier with this new remote monitor, but also with the Converter / Charger I recently purchased that it monitors! Great Customer Service, great products at a great price... what else could you ask for?!?!?
I received the product today and soon after the email requesting I rate the product. Don't know how the product works because I haven't had a chance to install the product
Patrick - 01/25/2021
It works well and makes sure that the power is correct Not the top of the line but a great value.
i bought this to trigger the progressive dynamics 9200 into 14.4v mode to charge a lifepo3 battery. well it works. it stays in 14.4 volt mode then the wizard takes over. no problems with etrailer. i have bought from them before and will again. post office is having problems with package routing in our area.
Gave it 4 stars because it had no instructions for what the lights mean
Great to know what my battery charger is doing.
It is nice to know the status of the converter that this Remote Pendant is monitoring, and it provides an indication that the charger is working as it should. Not sure that it will ever be used in the manual mode, but it gives me "piece of mind" that the charger is functioning. Really can not go wrong for the price.
Quite happy with this product. Easy to install and is clearly superior to the one it replaced.
Great service. Ordered a new converter for the coach and it arrived early. Installed it and were back up and running ready for the next trip. Thanks guys Stay healthy.
Very lightweight cheap feeling. Sometimes won't go into storage mode without having to unplug it. Returning
Etrailer order process was quick and efficient. Will be mounting the unit in a 5th wheel trailer. Replacing a conventional converter unit.
Works perfectly and adds great additional functionality to my PD9200 converter.
This is one of the best improvements that I've made to my 5the wheel.
Fast shipping excellent communication, no problems.
As advertised, went from a 55amp to 60. Working great
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.