Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.
view full answer...Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...I checked with B&W and their Trailer Hitch Receiver Lock for 3" Hitches item #BW23FR doesn't have a maximum capacity listed because it is rated for a shear strength much higher than the capacity of any 3" receiver…
view full answer...Hey Miles, so the Curt tow bar lighting kit part #C96JR that you referenced installs by plugging inline with the taillight connectors of the vehicle so it's not going to interfere with any trailer wiring.
view full answer...The best place to start for tow bar lighting for your 2023 Jeep Wrangler will be the Roadmaster kit part #RM-15267 which once installed puts a 6-way on the front of the Jeep and then to complete the charge circuit all you would need is the part…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…
view full answer...The easiest to use and highest quality base plate kit that fits your 2023 Jeep Gladiator is the Blue Ox part #BLU53FR which would work great with a tow bar like the #BX7420. We do have custom fit lighting solutions like the Curt part #C96JR that…
view full answer...Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…
view full answer...The front air dam on your 2023 Ford F-150 Platinum will actually need to be removed to be able to install any of the front hitches. So yes, the front air dam will no longer be operational once you have the EcoHitch Hidden Front Mount Trailer Hitch…
view full answer...The Demco Hijacker Autoslide part #DM79GV would be a really great auto sliding fifth wheel hitch. It has more than enough capacity for the trailer you mentioned as it has a 4,500 lb pin weight capacity and an 18,000 lb towing capacity. This fits…
view full answer...I recommend switching to the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR on your 2019 Rockwood 2109S. These use a zinc coating for corrosion resistance which is superior to the powder coat finish used on the Scissor Jacks #LC285325 included with…
view full answer...Filter Your Search
Contact and Help