Is The Curt Pintle Hook # C45908 Compatible With An EZ Loader TI102BT 26-30ET Boat Trailer

Published 02/24/2024

Products Featured in This Question

Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs

(565)

$366.78

B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - 18K - Black

(4889)

$349.00

Question:

Im thinking about purchasing a C45908 hitch. I have a 2023 Ram 2500 4WD with diesel and Ill be towing a Triple Axle trailer, Manuf./model # EZ Loader TI102BT 26-30ET 12000, galvanized bunk trailer. Will the C45908 hitch work with this trailer? Thanks, Rob

asked by: Robert O

Expert Reply:

Hi Robert,

The Curt Pintle Hook # C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need to check the coupler for the ball size (likely 2" or 2-5/16") and measure for the drop/rise needed for the trailer to ride level. I've attached a guide below to help you measure for the drop/rise needed but if you can't measure the trailer you can get an adjustable ball mount with a decent drop/rise to fit.

An Adjustable ball mount like the B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - 18K # BWTS20040B would likely be just what you need.

expert reply by: Kevin C