Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-V

Question

Question:

I have a 2014 Honda CRV and want to install either a Draw Tite or Hidden Hitch class II hitch. Which hitch is the least obvious. My wife is concerned about how it will look on the car. From the pictures they both products look identical. Capacity and dimensions appear the same. Are they similar in quality?

asked by: Chuck

0

Expert Reply:

Draw-Tite and Hidden Hitch are both sister companies that are owned by the same parent company, Cequent Performance Products. Both hitches are identical. The hitches share the same weight capacity, installation would be the same and the quality would be equal.

If you'll be using the hitch for towing, you'll need the ball mount, part # 36051. You'll also need the trailer wiring harness, part # 118561 and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258.

I've provided a photo showing what the Draw-Tite # 36520 looks like when installed on a 2013 CR-V. I've also linked you to installation details and videos for the hitch and the trailer wiring harness.

expert reply by: Mike L

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 6

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 7

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 8

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 9

Hey Napoleon! The perfect hitch for your 2026 Honda CR-V Hybrid Sport is the etrailer #e98848. This is a Class III hitch with a bolt-on installation and a limited lifetime warranty. It also features a matte black finish which blends well with OEM…

view full answer...

Answer 10

Hi Dan! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13397 you were looking at is the hitch I recommend for your 2026 Honda CR-V Hybrid. This will actually fit the Hybrid and Non-Hybrid models, so you are perfectly good to go…

view full answer...

Answer 11

Hi Elliott! The Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2" #INXA568 will definitely fit on your 2016 Honda CR-V. It fits a crossbar spread of 20" to 35", so with you having 31", you are…

view full answer...

Answer 12

Hey Thomas, thanks for reaching out. After 10 years, some surface rust on a hitch isn't unusual, especially in areas that see road salt, moisture, or gravel. The big question is whether you're dealing with cosmetic surface rust or deeper…

view full answer...

Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-V

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching