bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Drop - 1 Inch
  6. Rise - 1 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Draw-Tite

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K

Part Number: 36051
In Stock
$32.44
Retail:$56.85
You Save: 43%
Trailer Hitch Ball Mount
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K part number 36051 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2184)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - 36051

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Drop - 1 Inch
  • Rise - 1 Inch
  • No Ball
  • 3500 lbs GTW
  • Class II
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 7" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Drop: 1-1/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36051 Draw-Tite Class II Ball Mount - 5/8" Rise or 1-1/4" Drop - 3,500 lbs

Replaces 90001




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K - 36051

Average Customer Rating:  4.8 out of 5 stars   (2184 Customer Reviews)

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

by:

I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong.

Lee profile picture

Lee

10/25/2016

I am still happy with the items. However, I have not used them much over the past few months. But, they will get much more use in a couple of weeks. I am putting the finishing touches on a camper that I have been building for half a year.thanks,



by:

This is an average product. Unfortunately it si too short to use on my 2018 Rogue with Draw-Tite hitch 36542. I will have purchase a longer ball mount such as Curt 45519.

Victoria B. profile picture
Etrailer Expert

Victoria B.

8/13/2019

Another drawbar option, and the one recommended for this hitch in the installation instructions, is # 36053. I have linked it here for your convenience.



by:

I received exactly what I ordered when I expected it and the pricing was super competitive. The drawbar fits my Gator perfect. Great online shopping experience. I Highly recommend Etrailer.com.

William S. profile picture

William S.

8/12/2020

One year later this product has done the job without fail. Still very satisfied.



by:

Items packed well delivered on time. Doesn't get much better that that.



by:

We used our car hitch and cargo carrier last summer in a Honda Accord to support a cargo carrier. It held up great on a 4,000 mile camping/hiking trip from Mid Missouri to Glacier National Park, MT. We were able to use the carrier/hitch to carry our large tents and baggage (approx 120#)directly behind our car trunk. Initially I was a little hesitant at the smaller 1-1/4" tube hitch, but it was very stable throughout the long trip. Sure was a lot less drag than putting all our gear on a roof cargo carrier.



by:

The service is great and so is the price. Box came damaged but if it installs as easy as the last one I bought from etrailer I will be very happy!



by:

This is the 2nd hitch package I've bought from etrailer.com. (The first was for a 2011 Outback, and this one was for a 2017 Outback.) And like the first, this order was handled perfectly by the etrailer rep. The hitch and drawbar arrived as promised and I had my mechanic install it yesterday. He said it was a fairly simple job (took him less than an hour) and the new wiring harness simply plugged in to the existing harness in the 2017 Outback (as opposed to having to be spliced in the 2011 Outback with the first hitch package). Also the price was very good... more competitive than buying it from, and having it installed by, a local dealer. All in all, it was a painless and pleasant experience. I will definitely buy my next hitch from etrailer when it's time to replace my 2017 Outback.



by:

Volkswagen ID.4 needs a drawbar no longer than 7" - could not find one local or on [online vendor], but etrailer got me covered. Shipping was fast.



by:

Unit has worked well and held up. I only removed it once and that was for a week to travel for vacation. The paint is still like new, no rust can be seen. Unit creates no noise while driving with or without a trailer attached, not like a former hitch I had.



by:

Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.



by:

The Convert-A-Ball is made in USA, appears to be high quality and just what I was looking for. The Draw Bar however was made in China

The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for.
I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good.
Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars.
Otherwise am happy with the order.








by:

I like my Draw-Tite hitch and the second ball mount I just purchased so I can switch between 1 7/8" and 2" balls easily. Purchase and delivery through etrailer was effortless. I'm a happy customer.



by:

I installed this on a 2013 Outback in about an hour and a half. After drilling the holes and spraying the undercoating everything went together without a problem. Wiring harness was just as easy. Nice video to help.



by:

Fits well with the Drawtite class 2 hitch and places tongue for my 1/2 utility trailer level.



by:

Just what I needed for my Honda.



by:

Product is fine. It would have been nice to know that it came with a hitch pin and clip so that I didn't need to order one in addition to the ball mount.



by:

Easy website to navigate. Found the hitch for our bike rack quickly, and the ordering process was simple. Received my items expediciously too. Will be back for more when needed. Very competitive pricing, too.



by:

It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.



by:

got my hitch today everything was in the box. I liked the web site it was easy to use . the installation videos are very helpful ,and it was easy to find the hitch for my car . Thanks Great Job. Mike H



by:

I also purchased a receiver hitch for a Subaru Outback. Everything arrived in good shape and promptly at a good price.



by:

Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.



by:

All of the items order where shipped correctly and the Installation of products where excellent. The how to video’s where very helpful. I would highly recommend etrailer. Installation took me two hours to complete in my driveway.



by:

Finished nicely and fit perfectly, except had to take a file to the inside of the receiver as the punched holes deformed the tube slightly. Now...smooth!



by:

All parts fit as required. Only problem was the instruction for the hitch was for a different auto. It was simple enough to install with the install video. Good product.



by:

They are very good trailer products I like them and they’ve served me very well. I would be a repeat customer and recommend etrailer to my friends.


25
2181
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Comparing Weight of 1-1/4 Inch Receiver to 2 Inch Receiver for 2020 Honda CR-V
    For your 2020 Honda CR-V, the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36597 has a shipping weight of 24 lbs and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 has a shipping weight of 30 lbs. Even with a towing capacity of 1,500 lbs. I still recommend using the 2 inch receiver because there are more accessory options and sometimes more cost efficient options using that receiver size. For instance the # 36051 is recommended for the...
    view full answer...
  • Replacement Hitch Hardware for Draw-Tite # 36520 and Wiring Harness for 2014 Honda CR-V
    Yes! We can help you with both of these items. Replacement hitch hardware can be ordered by itself simply by entering the part # RHK into our search box, and then entering the hitch part # 36520 and selecting Draw-Tite from the drop-down menu. I have linked you to two helpful hitch installation articles as well as to an install video. The hitch installs without drilling or welding. The recommended ball mount for use with this hitch is part # 36051; with this ball mount you can use either...
    view full answer...
  • Trailer Hitch and Wiring Harness Recommendation for Towing Dirt Bike w/ 2001 Volvo V70 Station Wagon
    Since you'll be using the hitch for towing purposes, I'd recommend you go with the Draw-Tite # 36297. The hitch does indeed include all necessary installation hardware. In addition to the hitch, you will need a ball mount like # 36051. You'll also need a trailer wiring harness like part # C59496 and a trailer ball like part # 19257 for a 1-7/8 inch ball or # 19258 for a 2 inch size. The coupler on your trailer will have the correct ball size stamped into the metal of its coupler. I'm...
    view full answer...
  • Parts Needed for Towing Trailer with 2013 Honda CR-V
    Your 2013 Honda CR-V can be equipped with any of three different classes of hitch, Class I, II or III. These differ in their towing capacities and sizes. Both Class I and class II hitches have a 1-1/4-inch receiver opening while a Class III hitch has a 2-inch receiver. For more on this you can refer to the linked articles on hitch sizes and classes. It is important that both your car itself, and your hitch, have enough capacity for the trailer you intend to tow. If the maker of your trailer...
    view full answer...
  • Trailer Hitch and Wiring Recommendations/Comparisons for a 2006 Subaru Forester
    For the 2006 Subaru Forester there are only Class II hitches with 1-1/4 inch receivers available. The Draw-Tite hitch # 36311 and Curt hitch # C12038 are both rated for 3,500 pounds gross trailer weight. The Curt hitch is rated for 350 pounds tongue weight and the Draw-Tite is rated for 300 pounds tongue weight. These capacities are greater than what the vehicle is capable of though. According to the owner's manual if the trailer has brakes then the vehicle can tow 2,400 pounds gross...
    view full answer...
  • Recommended Class II Trailer Hitch for Towing Small Utility Trailer w/ 2008 Subaru Forester
    The Curt Class II trailer hitch you referenced, part # C12038 has a 3500 lb towing/350 lb tongue weight capacity. If you'll only be using the hitch for towing a trailer, it should work just fine for you. However, if you're wanting to use the hitch as an attachment point for other hitch mounted accessories like a cargo carrier or a bike rack, it wouldn't be the best choice. Curt's warranty requirement state that all non-trailer loads need to use a stabilizing strap, like part # 18050. The...
    view full answer...
  • Ground Clearance with Draw-Tite Trailer Hitch 36408 Installed on a 2014 Chevy Equinox
    When we installed Draw-Tite trailer hitch # 36408 on a 2013 Chevy Equinox (it also fits 2014 models) it measured 14-1/4 inches from the ground to the top of the receiver opening. But to the bottom of the hitch it would be approximately 12-3/4 inches (subtracting 1-1/2 inches for the thickness of the metal and the receiver opening). This will likely be much better than on a VW Golf. If you plan on doing some towing the correct ball mount is # 36051. For a 1-7/8 inch ball use # 19256 and...
    view full answer...
  • Is Drilling Required to Install etrailer Trailer Hitch # e53AR on a 1995 Dodge Dakota
    According to the installation instructions, you will have to do a little bit of drilling in order to install etrailer Trailer Hitch, # e53AR, on your 1995 Dodge Dakota. I have included a link to the installation details for you to view. With any of the available hitches for your truck, there will be some drilling involved. If you decide to go with this hitch, the ball mount is # 36051 and you can use pin and clip # PC2. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2...
    view full answer...
  • Ball Mount for 2018 Subaru Outback Wagon With Draw-Tite Trailer Hitch
    The correct ball mount for the Draw-Tite # 36493 trailer hitch on your 2018 Subaru Outback is the Draw-Tite Drawbar # 36051. This ball mount comes with a hitch pin though you will need a hitch ball as well, depending on the size of your trailer's coupler; you will either need 1-7/8" Hitch Ball # 19258 or 2" Hitch Ball # 19256. If you want to add a 4-flat wiring harness to your '18 Outback to power your trailer's lights you will need the Wiring Harness with 4-Pole Flat Trailer Connector...
    view full answer...
  • Install of Curt C11555 On 2014 Honda CR-V- Can Underbody Panel Be Left Off Instead of Trimmed
    That would be entirely up to your discretion. The linked installation instructions for the Curt # C11555 include a diagram outlining exactly where the panel needs to be trimmed, but if you wish you could certainly simply remove the panel and not re-install it. The panel makes the vehicle slightly more aerodynamic, but we're talking by a tiny amount. Not all models of the CR-V have the panel, so leaving it off wouldn't be a big deal. If you'll be using the hitch for some light duty towing,...
    view full answer...
    Image 1 for
  • Hitch With Most Ground Clearance for 2020 Subaru Impreza
    When the Draw-Tite Class II # 36644 is installed on a 2020 Subaru Impreza, you'll have right at 14-1/2 inches of ground clearance under the hitch, which better than any of the other hitches we offer for that vehicle, and is excellent for a vehicle of that type. Ten to 12 inches is about average for a smaller car like the Impreza, so 14-1/2 is pretty good. If you'll be using the hitch for towing, you'll need a few other items to complete your towing system. for a trailer wiring harness,...
    view full answer...
  • Anti-Rattle Device Recommendation for Ball Mount # 36051
    You'd need an anti-rattle device like the part # RM-061-125 to remove the movement you have of the # 36051 in the hitch you have. This will hold the ball mount tight to the hitch and remove all movement.
    view full answer...
    Image 1 for
  • Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-V
    Draw-Tite and Hidden Hitch are both sister companies that are owned by the same parent company, Cequent Performance Products. Both hitches are identical. The hitches share the same weight capacity, installation would be the same and the quality would be equal. If you'll be using the hitch for towing, you'll need the ball mount, part # 36051. You'll also need the trailer wiring harness, part # 118561 and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258. I've provided...
    view full answer...
    Image 1 for
  • Class II Hitch Recommendation for a 2011 Kia Sportage SX
    The best priced hitch we offer for the 2011 Kia Sportage SX is the Draw Tite Hitch part # 36510. This is a Class II hitch that should work very well for you. Check out the install video I attached for more info as well. For a ball mount you would want the part# 36051, for a 1-7/8 inch ball # 19256, and for a 2 inch ball # 19258. For trailer wiring part # 118526. Be sure to check the towing capacities listed in the owners manual of your vehicle and be sure not to exceed this figure.
    view full answer...
  • Recommended Trailer Hitch Receiver and Trailer Wiring for 2017 Honda CR-V Touring
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36597 is a confirmed fit for your 2017 CR-V Touring. It will limit the use of the hands free tailgate sensors to either side of the center receiver tube, but will still allow that function without any noticeable changes. If you will be doing some towing with this receiver, I recommend the ball mount # 36051 which comes with the pin and clip along with the wiring harness # 118741. This custom-fit T-One connector...
    view full answer...
  • Differences Between Class II and III Trailer Hitches Available For 2007 Toyota Sienna
    According to my research, the 2007 Toyota Sienna LE is capable of towing up to 3500 lbs, but you'll want to confirm this for yourself by checking your owner's manual. A Class III hitch uses a 2 inch by 2 inch receiver opening, while a Class II has a 1-1/4 by 1-1/4 inch receiver opening. The Class II hitches available for your Sienna have a tongue weight capacity of 300 lbs, and a towing capacity of 3500 lbs. The Class III hitch has a slightly higher tongue weight capacity of 350 lbs and...
    view full answer...
  • Trailer Hitch for Swagman XC2 Hitch Mount Bike Rack on 2003 Subaru Forester
    The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester. To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650. The only time you'll need to use a ball mount, is for trailer...
    view full answer...
  • Class II Ball Mount Recommendation for a 2005 Chevy Equinox
    The recommended Class II ball mount for your 2005 Chevy Equinox is the Class II Drawbar # 36051 that you referenced. You might also be interested in the following products to complete your towing setup: Hitch Ball with 2 inch Diameter # 19258 Hitch Ball with 1-78 inch Diameter # 19256
    view full answer...
  • Will the Draw-Tite Class II Receiver # 36408 Fit The 2010 Equinox
    I spoke with my contact at the manufacturer and have confirmed that the Draw-Tite Class II receiver, part # 36408 will indeed fit your 2010 Chevy Equinox. Some items you may need with the Class II hitch are as follows, Drawbar # 36051, Use in rise position only. Pin and Clip # PC2 Ball # 19256 or # 19258 Wiring Harness # C56012 Hitch Lock # e98879
    view full answer...
  • Recommended Trailer Hitch Receiver Compatible with 2001 Saab 9-5 Wagon
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36286 is a confirmed fit for your 2001 Saab 9-5 Wagon. I double checked with the manufacturer and it is a fit for all 9-5 styles including your Wagon. This hitch will work well for 1-1/4 inch shank bike racks and other accessories. If you will be towing with this hitch, I recommend the 4 Pole Harness and Hardwire Kit # C59496 and ball mount # 36051. Then you will use a hitch ball like # 19256 for a 1-7/8 inch...
    view full answer...
  • Hitch, Wiring, Ball Mount and Towing Mirrors for 2014 Hyundai Tucson for Towing 2009 Aliner Alite
    We can get your 2014 Hyundai Tucson ready for towing your 2009 Aliner Alite compact camping trailer. Since you already have the 1-1/4-inch Class II hitch you will need a ball mount, hitch ball, wiring and perhaps some towing mirrors to complete your setup. Based on my research the single-axle Alite does not have trailer brakes (since it has a dry weight of only a few hundred pounds it does not have to have them) so you should not need a brake controller. If it does have brakes then I...
    view full answer...
    Image 1 for
  • Dimensions For 1-1/4" Ball Mounts From Ends Of Mount To Receiver Hitch Pins
    Here are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar # 36051 8-3/8" and 1-15/16". Curt Class II Drawbar # C45519 10-3/4" and 1-1/2". Draw Tite Drawbar # 36053 11-1/16" and 2". Curt Class I Drawbar # C45019 10-7/8" and 1-7/16".
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Does Tow Hook Have To Be Removed For All Trailer Hitches On 2011 Mitsubishi Outlander Sport
    I did some research and found that all of the trailer hitches we offer for your 2011 Mitsubishi Outlander Sport require the removal of the tow loop. I recommend the Curt trailer Hitch, part # C13079. This is a Class lll hitch and has a 2 inch receiver opening. One note from Curt is that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps, like part # 18050. Failure to properly support these loads will void your hitch warranty from...
    view full answer...
  • Class II Hitch and Wiring for a 2014 Hyundai Tucson
    I can help you get all the correct parts you'll need to tow with your 2014 Hyundai Tucson; it isn't technically a kit that comes in a complete package, so the parts will need to be added to your online cart separately. For a Class II hitch on your '14 Tucson, you would want the Draw-Tite # 36510, and to add a 4-flat connector you would need T-One Vehicle Wiring Harness # 118501. The Draw-Tite hitch has a 1-1/4" receiver, and the recommended ball mount is # 36051, which comes with the...
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .4



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924