bing tracking image
Q & A Icon

Flat Tow Set Up for a 2026 GMC Canyon AT4  

Updated 10/01/2026 | Published 09/30/2026

Question:

Hi I have new 2026 GMC AT4 Canyon and I would like to set it up to be flat towed behind our 2024 Thor 29a Freedom traveler. Can you send me a list of the equipment that I would need ? Thanks Chuck

0

Expert Reply:

Hi Charles,

Congrats on the new truck! To flat tow it behind your Thor Freedom Traveler motorhome, I suggest you use the following parts:

-Roadmaster Direct Connect Base Plate Kit part # RM48GR, these base plates fit only the AT4 model not the AT4EV and do NOT work with an off-road bumper. There are currently no base plates available that work with an off-road bumper.

-Roadmaster Nighthawk Tow Bar part # RM-676 is rated for 8K, which is more than enough for the weight of the Canyon and includes the 6-way and 7-way power cord to run from your RV to the vehicle

-Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-154 will carry the RV brake and turn signals to the vehicle's while it's being towed and prevent any electrical feedback

-Roadmaster Battery Disconnect for Towed Vehicles part # RM-766 will disconnect your battery while towing to keep the battery from draining while towing and stop computers from triggering unwanted functions

-Roadmaster Brake-Lite Relay part # RM-88400 will prevent your towed vehicle's brake lights from cancelling out your RV's turn signals

-Roadmaster Charge Line Kit part # RM-156-25 keeps the battery charged while towing so it doesn't die. Some electric systems will still run off the battery even with it disconnected

-Demco Stay-IN-Play Duo Flat Tow Braking System part # SM99251, will permanently install in your Canyon and read the RV's brake light signal to apply the brakes to the Canyon at the exact moment the RV is braking. It comes with an LED indicator that goes on the Canyon's dash so you can see when the brakes are being applied

-Roadmaster Tow Defender part # RM-4750 is a protective screen to keep rocks and other debris from flying up and damaging the truck while it's being towed

-Roadmaster Dual Hitch Receiver part # RM83SR, you'll need this if your tow bar is 3" or higher than where it connects to the base plates to make sure its level and has a safe connection

Do you have any trips planned for your new GMC Canyon?

expert reply by:
0
Claire H
Roadmaster Nighthawk Tow Bar
Roadmaster Nighthawk Tow Bar
(click to enlarge)
Charles W. profile picture

Charles W.

9/30/2026

Is there another tow bar that would work well and save a little money ? Or are there good reasons for the one that is listed ? Thanks Chuck

Claire H. profile picture
Etrailer Expert

Claire H.

10/1/2026

@CharlesW The Nighthawk tow bar is by far the highest recommended tow bar that we carry. It has integrated LED lights built into it that work in sync with your motorhome and vehicle's lights to make your set up more visible when towing. It also includes built in safety cables and 7 to 6-way plug attached which keeps everything together on the tow bar. If you prefer a more cost-effective tow bar, the etrailer XHD Non-Binding Tow Bar part # e84ZR is rated for 10,500lbs, works with the Roadmaster base plates, and includes safety cables attached to it. If you do go with the etrailer tow bar, you'll need a different wiring kit that includes the 7 to 6-way cable, the Roadmaster 4-Diode Universal Wiring Kit part # RM-15267, because the wiring kit in my original answer doesn't include one since it comes attached to the Nighthawk tow bar.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>