Brake Controller Wiring Harness for Tekonsha Prodigy P3 On 2020 Honda Ridgeline

Question

Question:

I have a Tekonsha Prodigy P3 controller I bought last year. I had to get a new vehicle and now need a cable to connect it to 2020 Honda ridgeline rtl-e. Do you have a plug and play cable for that?

asked by: Jason C

0

Expert Reply:

Hey Jason! I do have a solution, but Tekonsha is for sale right now and most of their parts are not available. This includes the custom wiring harness for your 2020 Honda Ridgeline.

What you can use is the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51392. You will also need the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV which will allow you to connect the Curt harness to your P3.

What are you towing with the Ridgeline?

expert reply by: Robin H

0

Curt Wiring Adapter
(click to enlarge)

Jason C.

5/27/2026

Once or twice a year I rent a smaller camper. These usually require brake controller. Occasionally I rent a U-Haul but those don’t need a controller.

Robin H.

5/27/2026

@JasonC sounds good! Those two adapters will let you plug your Prodigy P3 right into the Ridgeline so you’ll be all set the next time you rent a camper.

Answer 1

The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3070-P has been confirmed by Tekonsha to fit your 2022 Honda Ridgeline. This will allow you to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 as a plug and play…

view full answer...

Answer 2

For a trailer brake controller, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, #3070-P which is completely plug-in-play. The Tekonsha P3, #90195 is the…

view full answer...

Answer 3

You can certainly use the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional #90195 on your 2022 Honda Ridgeline. It was not yet confirmed that the custom wiring harness fit the 2022 which is why you didn't see it listed.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Brake Controller Wiring Harness for Tekonsha Prodigy P3 On 2020 Honda Ridgeline

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching