Parts Needed to Convert 4-Way of 2019 Mazda CX-5 to 7-Way
Updated 05/26/2026 | Published 05/19/2026 >
Products Featured in This Question
Question:
I have a 2019 Mazda cx5 and have purchased the hitch and 4 way connector. I cannot figure out what else to buy, but I know I need the 7 way pin connector. I watched the videos and I don’t think I can do this myself. Are there products I can buy that are easier to install? If not, what can I buy to have a profession install it?
asked by: Ian C
Expert Reply:
Hey Ian, so to convert the 4-way to a 7-way for just trailer lighting all you'd need is the part # 37185. Now if the trailer has brakes that you need to activate as well instead the adapter you'd need is the part # ETBC7L and then for the easiest to install and use brake controller the Curt Echo Mobile part # C51180 which just plugs into the 7-way and once synced to your smart phone is ready to be used. Does your trailer have brakes you are wanting to activate?

John S.
5/23/2026
Hey Ian, if your having trouble connecting the 4-pin trailer wiring to your car, I would do a quick YouTube search to find more videos. On your vehicle, the connection is inside, in the cargo area behind one of the panels. I don't know which one. Once you have it connected, you should be able to route it outside through a grommet fairly easily. If you need a 7-pin and a brake controller, you will need to add wiring and things do get a bit more complicated. You can use an adaptor to convert the 4-pin to a 7-pin with no brake controller, and it will give you working lights but no brakes. Your vehicle has a max towing weight of 2000 pounds, so make sure you stick to that or you may damage your vehicle, or worse, cause a bad accident.

Continue Researching
- Q&A: Recommended Hitch and Installation Difficulty for a 2023 Mazda CX-5
- Q&A: What Is The Best Trailer Hitch Receiver For My 2021 Mazda CX-5?
- Q&A: Recommended Hitch and Wiring Harness for a 2025 Mazda CX-5
- Q&A: Trailer Hitch Recommendation for 2022 Mazda CX-5
- Q&A: What is the Best Hitch for a 2024 Mazda CX-5?
- Q&A: How Long Does It Take to Install the Demco Stay-IN-Play Duo Braking System?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Which Hitches are Made in the USA
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Routing the Power Wire for a Trailer Wiring Harness
Greg
5/23/2026
I used the 7-way (male) converter to 4-way (female) to hook my old boat trailer up which has a backup brake solenoid that stops it from backing up without the proper power to activate it. (It’s a surge braking system)