Replacement Mounting Bracket for Prodigy P3 Brake Controller # 90195

Question

Question:

Hello. I need a second under dash pocket mount for my Tekonsha Prodigy P3 Trailer Brake Controller. Do you sell that individually?

asked by: William B

0

Expert Reply:

Hey William, yes we do have a replacement mounting bracket for the P3 part # 90195 with the part # TK5906. Did yours break?

expert reply by: Jameson C

0

Jameson C.

9/2/2025

Hey William, did the replacement mounting bracket work out for your Tekonsha Prodigy P3 Brake Controller? I'm curious to know how it went so I can help others in a similar situation.

Reply

Answer 1

All of the Class II ball mounts out there have a 3/4 inch diameter ball hole. It might be the best solution for you to replace the ball you have with one that will fit that ball hole size like what comes with the #36065 that you mentioned. For a 2…

view full answer...

Answer 2

The Convert-A-Ball Ball Mount for 2" hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs item #AMSC10 that was previously referenced is a superior hitch to the Brophy 10" drop item #BM10. It is a stronger reinforced hitch that has a…

view full answer...

Answer 3

Switching your ball mount to one with a 5 inch rise, like the Curt #C45336, will help level your trailer but it won't take the sag out of your 2010 Hyundai Santa Fe. The trailer's tongue weight will still be pushing the rear of the vehicle…

view full answer...

Answer 4

A high-low adapter like the Roadmaster Adapter #RM-076 that you referenced is designed for use with a flat towing setup, but I do have a solution for you to tow your trailer level with your 2018 Volkswagen Atlas. If the 10-1/2 inch measurement that…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 10

Hey Paul, there really isn't any downside to going with the 7500 rated Air Lift kits like the part #AL57575 over the 5k rated kits aside from them costing a little more so for you I would definitely recommend the #AL57575. Are you wanting a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Mounting Bracket for Prodigy P3 Brake Controller # 90195

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching