What is Inner Width of DU35QR Durabilt Safety Chain Connectors for 1/2" Chain # DU35QR

Question

Question:

I have a 2022 F350 and it has a factory hitch. I’ve owned these before and what I need is the inside throat diameter to be greater than an inch to properly use them. What is the measurement

asked by: Tom

0

Expert Reply:

Hey Tom, I checked with Durabilt and the inner width of the Durabilt Safety Chain Connectors for 1/2" Chain # DU35QR that you referenced is 1.1 inches so it would work for you.

expert reply by: Jameson C

0

Steve M.

5/7/2026

I've had mine for a couple of years now on my 2018 F250. I tow a camper, equipment trailer, dump trailer. No issues, easy install.

Jameson C.

5/7/2026

@SteveM thanks for the feedback!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Hi Rick, congratulations on the new Bronco! That's going to make an awesome vehicle to have behind your Dutch Star. As for your question, the information about pulling fuses is close, but it's actually fuses 28 and 29 that Ford requires on…

view full answer...

Answer 5

Hey Mark! Thanks for your continued business. We appreciate it. :) We get questions like this a lot as it's hard to tell sometimes if you have LED or halogen / incandescent tail lights. If you look at the taillight housing and see bulbs through…

view full answer...

Answer 6

Hello Steven, thanks for reaching out. Yes! The Air Lift LoadLifter 5000 Air Helper Springs #AL38FF will indeed fit your 2022 Ford Bronco with the Sasquatch package. All the hardware and brackets will bolt on without modifications. I also recommend…

view full answer...

Answer 7

Hey Greg! I would be happy to put that together for you. For a complete setup you will need the base plate kit, tow bar, safety cables, wiring, and a supplemental brake system. I recommend the following: -Blue Ox Base Plate Kit #BLU23XR -Blue Ox…

view full answer...

Answer 8

Hey Jake! I believe our test Bronco is running the same style mud-terrain tire as your Sasquatch package. We measured 8" from the center of the #TS46VR hitch pin hole to the outside edge of the spare tire, so that should give you a good idea of…

view full answer...

Answer 9

No, you can't. Those hooks are only for recovery or pulling something they're not rated to be flat towed with. You are actually going to have to remove them to install a base plate kit on your 2023 Ford Bronco. Since you have a Blue Ox Alpha…

view full answer...

Answer 10

Hey Mike! I think most of the stories from damage come from really rough roads or off-road scenarios. I wouldn't expect a standard swing away like the Yakima BackSwing #Y02483 to have an issue unless you exceed the weight capacity. If we assume…

view full answer...

Answer 11

Hey Bill, for the 2025 Ford Bronco the bumper type you go with will determine which Roadmaster base plate kit you'll need. If you go with the standard bumper you would need the part #RM79RR or if you go with the Modular bumper you would want the…

view full answer...

Answer 12

Hey Cali, thanks for the information! To add a hitch, 7-way, and brake controller to your 2025 Bronco Badlands you will need the following parts: Hitch - Curt Hitch item #C76WR 7-Way Connector - Universal Installation Kit item #ETBC7 Brake Controller…

view full answer...

What is Inner Width of DU35QR Durabilt Safety Chain Connectors for 1/2" Chain # DU35QR

Product Page this Question was Asked From

Continue Researching