Replacement Mounting Hardware for Yakima Skybox NX XL

Question

Question:

Ordering replacement clamps for Skybox NX XL. Do you have a recommendation on another product that would prevent roof box from sliding? Long road trips result in shift of box that constantly require adjustment. Vehicle is 2023 Nissan Pathfinder Rock Creek with standard roof rack that seems to be the issue for box

asked by: Trisha A

0

Expert Reply:

Hey Trisha, Yakima only offers one set of replacement hardware for the Skyboxes like you have which would be the part # Y62XR. So this would be what you'd need to use as a replacement. Is it possible you weren't getting the hardware tight enough and that's why the box is moving?

expert reply by: Jameson C

0

Answer 1

Thanks for your question, Bhavin. I couldn't find anything definitive so I reached out to Yakima to get confirmation. They let me know that the Yakima SmarT-Slot Mounting Kit part #Y25AV will not work on the older SkyBox's. The only…

view full answer...

Answer 2

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 3

Hey Craig, thanks for reaching out! The Yakima SmarT-Slot Mounting Kit #Y25AV is only compatible with the newer Yakima roof cargo boxes so you unfortunately won't be able to utilize it with the older RocketBox design. If you're needing to…

view full answer...

Answer 4

Instead of getting a spare key made for a Yakima SkyBox NX Roof Cargo Box such as #Y95AV you will need to purchase a new key. All you need to know is the key number; if you are unsure of the key number you will need to use Control Key #Y8007835,…

view full answer...

Answer 5

I would first check the owners manual or with the Ford dealer on the roof capacity of your Ford E-350 Van. A roof rack may have a higher load capacity than your Ford Van, and you will be limited to the lowest weight capacity between the vehicles roof…

view full answer...

Answer 6

The widest portion of the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes #Y62XR is 3-1/4".

view full answer...

Answer 7

It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…

view full answer...

Answer 8

Hey John, the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV that you referenced is compatible with round bars and aero shaped bars. The mounting hardware can clamp on to either bar shape and work really well. I attached a picture down below that shows…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Mounting Hardware for Yakima Skybox NX XL

Product Page this Question was Asked From

Continue Researching