Can I Mount an Older Yakima SkyBox 16 Carbonite Box to The T-Slots on my Roof Rack

Question

Question:

Hi, I have a Yakima, SkyBox 16 Carbonite Box from several years ago. My new car has wide roof rails with t-slots. Could I use the Yakima T-Slot adapters for my roof box? Thanks!

asked by: Bhavin R

0

Expert Reply:

Thanks for your question, Bhavin.

I couldn't find anything definitive so I reached out to Yakima to get confirmation. They let me know that the Yakima SmarT-Slot Mounting Kit part # Y25AV will not work on the older SkyBox's. The only replacement hardwre available for the older boxes is part # Y62XR.

The mounting mechanism is different in the newer SkyBox NX so the mounting hardware wouldn't be interchangeable. Hate to say but, we don't carry anything that would allow you to mount your current box to t-slots.

expert reply by: Gwendolyn Y

0

Bhavin R.

12/23/2025

That's disappointing to hear but really appreciate the clarificaion and going above and beyond to reach to Yakima for confirmation!

Gwendolyn Y.

12/29/2025

@BhavinR Anytime! If you ever have any more questions about something let me know. Hopefully I'll have a better solution for you next time.

Answer 1

There sure is Rob and congrats on the new SUV. To add a hitch to your 2026 Hyundai Ioniq 5, I recommend the EcoHitch item #EH72HR. This hitch is custom fit for your Ioniq 5 and comes with all hardware necessary for installation. The crosstube mounts…

view full answer...

Answer 2

Hey Trisha, Yakima only offers one set of replacement hardware for the Skyboxes like you have which would be the part #Y62XR. So this would be what you'd need to use as a replacement. Is it possible you weren't getting the hardware tight…

view full answer...

Answer 3

Hey Craig, thanks for reaching out! The Yakima SmarT-Slot Mounting Kit #Y25AV is only compatible with the newer Yakima roof cargo boxes so you unfortunately won't be able to utilize it with the older RocketBox design. If you're needing to…

view full answer...

Answer 4

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 5

The widest portion of the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes #Y62XR is 3-1/4".

view full answer...

Answer 6

Instead of getting a spare key made for a Yakima SkyBox NX Roof Cargo Box such as #Y95AV you will need to purchase a new key. All you need to know is the key number; if you are unsure of the key number you will need to use Control Key #Y8007835,…

view full answer...

Answer 7

It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…

view full answer...

Answer 8

I would first check the owners manual or with the Ford dealer on the roof capacity of your Ford E-350 Van. A roof rack may have a higher load capacity than your Ford Van, and you will be limited to the lowest weight capacity between the vehicles roof…

view full answer...

Answer 9

Hey John, the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV that you referenced is compatible with round bars and aero shaped bars. The mounting hardware can clamp on to either bar shape and work really well. I attached a picture down below that shows…

view full answer...

Answer 10

We do carry the replacement latch for the RC Manufacturing T-Series Trailer Tongue Toolbox #350980 that you referenced. It is listed as part #3W-461-545-SSL-EP on our site. This has the latch, seal, rivets, and new keys.

view full answer...

Answer 11

The overall dimensions of the #3W-461-545-SSL-EP is 3-3/8" wide by 4-3/8" tall. The mounting holes at the top are 2-13/16" apart (green), the holes from top to bottom are 2-15/16" apart (blue line) and the bottom holes are…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can I Mount an Older Yakima SkyBox 16 Carbonite Box to The T-Slots on my Roof Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching