Width of Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes # Y62XR

Question

Question:

I am looking at the Y62XR. Wondering if you can provide the width of the part.

asked by: Nicholas

0

Expert Reply:

The widest portion of the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes # Y62XR is 3-1/4".

expert reply by: Bud M

0

Width of Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes # Y62XR
(click to enlarge)

Answer 1

Hey Trisha, Yakima only offers one set of replacement hardware for the Skyboxes like you have which would be the part #Y62XR. So this would be what you'd need to use as a replacement. Is it possible you weren't getting the hardware tight…

view full answer...

Answer 2

Thanks for your question, Bhavin. I couldn't find anything definitive so I reached out to Yakima to get confirmation. They let me know that the Yakima SmarT-Slot Mounting Kit part #Y25AV will not work on the older SkyBox's. The only…

view full answer...

Answer 3

It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…

view full answer...

Answer 4

Hey Craig, thanks for reaching out! The Yakima SmarT-Slot Mounting Kit #Y25AV is only compatible with the newer Yakima roof cargo boxes so you unfortunately won't be able to utilize it with the older RocketBox design. If you're needing to…

view full answer...

Answer 5

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 6

Instead of getting a spare key made for a Yakima SkyBox NX Roof Cargo Box such as #Y95AV you will need to purchase a new key. All you need to know is the key number; if you are unsure of the key number you will need to use Control Key #Y8007835,…

view full answer...

Answer 7

I would first check the owners manual or with the Ford dealer on the roof capacity of your Ford E-350 Van. A roof rack may have a higher load capacity than your Ford Van, and you will be limited to the lowest weight capacity between the vehicles roof…

view full answer...

Answer 8

Hey John, the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV that you referenced is compatible with round bars and aero shaped bars. The mounting hardware can clamp on to either bar shape and work really well. I attached a picture down below that shows…

view full answer...

Answer 9

For your Yakima SkyBox, you are going to need the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes #Y62XR. This replacement clamp will work on all Yakima SkyBoxes, so if that's what you have this'll work fine. If this is not what you…

view full answer...

Answer 10

Unfortunately there is no lock housing upgrade available for the Yakima SpaceCadet. However, if you have an open locking mechanism (Which would look like a metal cylinder with a plastic plug or just nothing in it) and no lock cylinder, you can…

view full answer...

Answer 11

Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt #C25FV (13568) and #C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Width of Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes # Y62XR

Product Page this Question was Asked From

Continue Researching