Is There Cutting Required To Install The Curt Hitch C99RJ On A 2026 VW Tiguan?

Question

Question:

DOES THIS HITCH FIT A 2026 TIGUAN WITHOUT CUTTING ANYTHING?

asked by: THOMAS

0

Expert Reply:

Hi Thomas!

While the Curt hitch # C99RJ will fit your 2026 VW Tiguan, there will be a pretty minimal amount of cutting to complete the install (see included image). It is a pretty small piece that needs to be cut, and it is on the underside of the bumper, so it will not be seen unless you crawl underneath the vehicle.

Other than that part, the rest is pretty straight forward. Just leading some bolts through the frame and tightening everything down. The whole process shouldn't take more than a couple hours at most.

What are you planning on using a hitch for? And is this by chance a leased vehicle? That tends to be why a lot of people ask about the cutting for installs.

expert reply by: Lazer S

0

Cutting Needed For Hitch Install
(click to enlarge)

Curt Hitch C99RJ Installed
(click to enlarge)

Thomas

4/8/2026

This is for a Kuat single bike rack on a leased vehicle.

Lazer S.

4/8/2026

@Thomas Dang. Was hoping you weren't going to say that. This is the only hitch currently available for the 2026 Tiguan, but that may change in the near future. I can't say any future hitches won't require cutting as well, but it is a possibility.

Answer 1

Good morning Don. The custom-fit plug and play Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector C56RJ for your 2026 VW Tiguan is still preorder as of now (3-9-26). Unfortunately I can't see when they will show up, so I…

view full answer...

Answer 2

Hello Craig, They changed the frame on the Volkswagen Tiguan for the 2025 model, so the one from before that you were able to move from car to car will no longer fit. We use the picture from the 2024 for the pre-order because it will look somewhat…

view full answer...

Answer 3

Hi Kate! We actually have a hitch available for your 2025 VW Tiguan with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C99RJ. I confirmed this directly with Curt, just to be sure. The only wiring we have available is the Curt…

view full answer...

Answer 4

Hey Paul. You can indeed install the Curt Hitch item #C99RJ on your 2025 VW Tiguan without trimming. The only issue with not trimming the lower fascia when installing the Curt item #C99RJ is that square tube connecting the receiver touches the trim.…

view full answer...

Answer 5

Hey Joe, we have confirmed that the Curt hitch part #C99RJ fits all models of the 2026 Volkswagen Tiguan including the SEL R-Line Turbo models. When you say plug and play do you mean is there no drilling or welding? If so, this is true there is no…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Is There Cutting Required To Install The Curt Hitch C99RJ On A 2026 VW Tiguan?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching