Looking For Andersen Weight Distribution Hitch For 2022 Gulfstream Vintage 19RBS

Question

Question:

I am looking for the Andersen Hitch sku 3340. The person at Andersen said that this is the hitch I need for my truck and trailer. I have a 2023 Nissan Frontier SV which will be towing a 2022 Gulfstream Vitage 19RBS.

asked by: Jeffrey D

0

Expert Reply:

Hello Jeffrey, thanks for reaching out. We do have the Andersen 3340 WD hitch available. Take a look at the following:

- Andersen Weight Distribution System w/ Sway Control - 4" Drop - 14,000 lbs GTW, 1,400 lbs TW # AM3350

I agree with the person you talked to at Andersen. This is a good match for your Frontier and your 2022 Gulfstream Vitage 19RBS (really neat camper by the way). The Andersen WD hitch is pretty easy to set up, and it rides nice and quiet. I've found it works great for smaller trucks and trailers so I think it's a solid choice for your setup.

expert reply by: Jesse M

0

Andersen Weight Distribution System w/ Sway Control
(click to enlarge)

Jesse M.

3/4/2026

Hey Jeffrey, how did the Andersen weight distribution hitch work out with your Frontier and Gulfstream trailer? It sounds like a great match for that setup. Your feedback could help others deciding on a similar combo.

Jeffrey D.

3/4/2026

@JesseM The Andersen hitch worked great. Easy to set up and take down. Easy to use when backing up, you don't need to worry about going too far on your turns or disconnecting the hitch.

Jesse M.

3/5/2026

@JeffreyD That's great, Jeffrey! Glad to hear you're happy with the Andersen hitch and that it was so easy to set up. Thanks for sharing!

Answer 1

Hey John, the weight of the Andersen weight distribution #AM3350 is 53 lbs and the Blue Ox #BXW1000 weighs 95 lbs. Worth mentioning is that the Blue Ox is going to do a much better job of actually redistributing the tongue weight to the tow vehicle…

view full answer...

Answer 2

The total weight of the Equal-i-zer Weight Distribution System #EQ37120ET that you referenced is 115 lbs, but that would include components that would not be lifted into the trailer hitch. Realistically you would be lifting the head and the shank…

view full answer...

Answer 3

Hello Domonic, thanks for reaching out. The correct weight distribution (WD) hitch for your 2021 Jayco Jayflight 33RBTS will depend on the loaded tongue weight. According to the online specs the dry hitch weight is 1,045 lbs but this does not account…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Looking For Andersen Weight Distribution Hitch For 2022 Gulfstream Vintage 19RBS

Product Page this Question was Asked From

Continue Researching