Is There a Hitch for the 2026 Hyundai Ioniq 5?

Question

Question:

Is there a hitch for the new 2026 Hyundai Ioniq 5?

asked by: Rob

0

Expert Reply:

There sure is Rob and congrats on the new SUV. To add a hitch to your 2026 Hyundai Ioniq 5, I recommend the EcoHitch item # EH72HR. This hitch is custom fit for your Ioniq 5 and comes with all hardware necessary for installation. The crosstube mounts entirely behind the rear bumper so all you're going to see is the 2" receiver.

The EcoHitch item # EH72HR is a class III hitch with a 2" receiver. It has a 2,500 lbs towing capacity and a 375 lbs maximum tongue weight, which means it's going to be great for towing a small trailer or using an accessory like a bike rack or cargo box.

I've attached a couple pictures below so you can see see what this hitch looks like installed.

What do you plan on using your new hitch for and how are you liking your new Ioniq 5 so far?

expert reply by: Jerred H

0

Ioniq 5
(click to enlarge)

Rob

12/18/2025

Thank you so much for the quick response and pictures. So far so good. I've only had it for a few days now and the weathers been sketchy so it's stayed inside. I plan on using the hitch for a bike rack I bought a few years ago from you guys. I can't remember what it was now. That's good to know about towing. I haven't even thought about it but that's something to keep in mind for sure.

Jerred H.

12/18/2025

@Rob You're welcome! I totally get that. The weathers been awful here too so my new Durango has been kept inside as well. Glad I could put that idea in your head about towing with the item # EH72HR. If you have any additional questions down the road don't hesitate to reach out.

Peter S.

12/19/2025

It is NOT an easy install!My installer was reluctant to proceed as he needed to cutplastic on my new car, You caannot see the problem unless you look closely but I did nothink it shhoulkd have eeen offered as fitting the car. I only use it for a bike rack.

Tom W.

12/20/2025

@PeterS The installation takes time, but it isn't that difficult. Just follow the videos and be patient un-snapping the side trim panels. Cutting the plastic is un-avoidable. I had to do on my Honda when I installed the hitch on that as well. It is now very common as cars have molding under the car for greater aerodynamics.

Answer 1

Thanks for your question, Bhavin. I couldn't find anything definitive so I reached out to Yakima to get confirmation. They let me know that the Yakima SmarT-Slot Mounting Kit part #Y25AV will not work on the older SkyBox's. The only…

view full answer...

Answer 2

Hey Craig, thanks for reaching out! The Yakima SmarT-Slot Mounting Kit #Y25AV is only compatible with the newer Yakima roof cargo boxes so you unfortunately won't be able to utilize it with the older RocketBox design. If you're needing to…

view full answer...

Answer 3

Hi Robert; I have attached the installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver #DT27YR below. If you plan on towing you will also need the Curt #C59NR for wiring and a ball mount like the etrailer #e67DR

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Is There a Hitch for the 2026 Hyundai Ioniq 5?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching