Want a clearer, more confident view when backing up or driving your RV? This camera system gives you sharp video, wide viewing angles, and a compact monitor, helping you see more around your rig and making every move easier.
Backing a trailer or motorhome is easier when you can see what is happening behind the RV instead of relying only on mirrors. This Vision S+ system includes 1 sharkfin camera with 1080p video, infrared night vision, and a 120-degree viewing angle, giving you a clearer rear view for driving, parking, and reversing.
Cab layouts do not all put the screen in the same spot, so the monitor needs some placement flexibility. The compact 5" touchscreen supports windshield or table mounting and includes a monitor table stand, monitor windshield stand, and cigarette lighter charger. Touchscreen controls let you switch through camera views and menu options from the screen.
This system does more than show the view behind the RV while backing up. Motion detection and auto-wake let the camera function as a security camera, and recording capability stores video to an SD card for later review. SD card is not included, so add one separately if you want to use the recording feature.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Huge difference from our old Furion camera. Crystal clear picture. Old one was blurry and much smaller. Easy installation. Instruction video on your site was spot on. So happy wirh our purchase.
Easy 15 minute install on my 2026 Connect trailer. The monitor and camera linked almost instantly and acquired the video stream in a couple of seconds.
Video is not smooth... Very slow frame rate like rapid slide show. Contacted Furrion, sent a video showing the problem and was told it was normal.. Looked fine to them. A system I bought on Amazon previously for another RV for less than half the cost did not have this issue. It works, just not well.
I purchased this for a new Fifth Wheel trailer as it had been prewired. I find the product to great and the installation went smoothly.
Love it for the most part. Signal drops out quite a bit and works off headlights being on.
I am impressed with the clarity and image reception. Definitely be sure and buy the SD card that is needed once it’s purchased. The trailer had a great price and always have very good technical and product representation. Their representative are always helpful and knowledgeable.
our 2025 keystone had a camera but someone needed more than us so it was somewhat ready the imitation screws that came in the package were a joke so off to menards for the correct length and size hooked and work perfect
Used this to replace my Furrion Vision S with the small dim display. This is a much-improved product that can be simply plugged in to replace the Furrion S (which was functionally almost worthless) with no rewiring.
Service grom your company was Great. Especially appreciated the updates,tracking info, I had a question about the product that was promptly answered by knowledgable staff.
Has definitely made my trailer towing less stressful and backing up is a breeze. Really like being able to see behind the trailer when driving. Image quality is very good. Installation and configuration was a breeze. Connected everything and turned it on and it worked. Only issue I had was there were no mounting screws included - there was a the camera mounting screws and another set of 1/4" long screws which were too short to use for mounting. Fortunately my trailer was prewired and I was able to re-use the old screws.
Highly recommend having a backup camera/monitor.
Since my Travel Trailer was pre wired for Furrion, I paid the extra for a Furrion. Install was about 20 minutes, and that was taking my time, making sure I didn’t lose those mini screws. Powered everything up an worked like it was supposed too. Real world test next week.
Just received camera system, well packaged and received on time. Will continue with review after installed.
Since our camper was already pre wired with the camera mount, it was simple to install. The camera works great. I definitely recommend this camera.
Very good resolution screen. It was plug and play installation for my Imagine travel trailer.
So full disclaimer. My trailer was already pre wired for a system from Furrion. Easy to install. Great picture. Once I figured out that my truck had to be running to provide power to the trailer for the camera to work it was easy. Key on engine off did not provide the necessary power. Set up the angle I wanted on the camera and good to go. Got to buy a SIM card for recording your trip. You can monitor all the time or use it for backing only.
We are very pleased with our Furion S+ camera system. The Furion S was all that was available when we purchase originally and this upgrade was well worth the price. The monitor does not wash out in direct sun nor black out after dark. I advise any RV camper to purchase. Also etrailer once again had quick response to our questions and shipment was here in 4 days. We would give more stars on product and service if it were available.
I have tried similar knockoffs to Furrion with decent results but I always seemed to have issues with the cameras failing prematurely. While Furrion is a bit more expensive, I think the quality and dependability is worth the extra cost. Like the old saying goes, you get what you pay for.
I have a 2024 Chevrolet Silverado 3500HD and therefore needed the PWM filter. I had an installer put in the filter and the camera. The installer tested the camera functionality (not with my truck) and stated that it was fine. I tested it in my truck later with the cigarette lighter cable provided in the box. I don't have a cigarette lighter 12v socket in my truck so I used the Swift Hitch
AC to DC Adapter for Swift Hitch Wireless Camera System
Part Number: PP01 to plug into. This adapter has worked fine for my TST 507 monitor. Well, when I plugged the Vision S+ monitor into the adapter, which was plugged into the AC outlet in my truck, it totally threw the truck's Infotainment system for a loop! It was like a virus had taken over my electronics and was paging through all of the menus, even making changes to data in fields. Luckily nothing permanent was changed in the electronics, but it was rather upsetting to see this. I still don't know if it was the cigarette lighter cable included in the box or the Swift Hitch 12v adapter that caused this. So I switched out the cigarette lighter cable with a Type A to Type C USB cable, plugged it into a USB port in my truck, and everything worked fine. Camera works great, the picture is great, and there is no fooling around with my truck's Infotainment system and data. I reported this issue to etrailer who in turn reported to Lippert/Furrion, from whom I am still waiting to hear from. If they shed any new light and why this issue occurred, I will update my review later.
I installed the camera and paired it with the monitor but it says not connected. I called Furrion and after being on hold for over 45 minutes I was told that it wont work with a chevy unless I purchase a 7 pin adapter. I have ordered the adapter but it wont arrive until 7/7 after the holiday. It would have been nice if E trailer had told me when purchasing the camera that I needed the adapter too.
Installed and wired as directed. Originally plugged in the monitor to the USB/C cable and result was no power. Checked cord in plugging to my phone. Result said it was charging. Then checked the cig lighter pluggin. Result that the monitor works w/ lighter pluggin.
I'm not sure what the USB cord was sent along for. Now that I found a way to power it up. The camera and monitor works as I was hoping. I'm able to see my trailer clearly behind my pickup "slide in" camper.
Great place to purchase from. This replaces my OG Furrion setup. I will be using the same rear view mirror mount for the Vision S+ display. I need to get a photo of the new display mounted to the rear view mirror.
The camera was very easy to install. I planned on installing the camera 2-inches below the center running light, but instead I removed the center running light and installed the camera in its place, and less holes to drill for a cleaner look. I've had this rv trailer for over a year, but I've always traveled with a companion that could assist and spot me when backing up, but my next camping trip will be solo. It was important for me to have this camera installed for backing into the camp sites I've reserved, as these are not pull through sites. It will also be nice to see any vehicles that are directly behind me that my side mirrors can't pick up.
A little expensive, but very good produ ct
It took me a little time to realize there is no in coming power.
Un till the running lights are on.
Ladder works great.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.