Troubleshooting Furrion Vision S that Screen Cuts in and Out
Updated 01/19/2026 | Published 01/15/2026 >
Question:
i have a Furrion system for backing up on my 2025 Keystone Cougar and I pull it with a 2025 GMC 2500 pick up and my camera and screen keeps cutting in and out, any ideas.
asked by: Robert W
Expert Reply:
Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps either way. Do you have the Vision S system or the Vision S+?


Nate
1/17/2026
I have the vision +. I pull a Jayco eagle 5th wheel that is 43ft long with a 25 F350. Mine cuts out occasionally as well. Mine is hit or miss. I just assumed it was too far away and needed a booster. But not sure


Richard
1/18/2026
I wired my Vision S+ to an overhead running light. I always drive with lights on, so it's always operating. Vision is very good and camera sees well into darkness. At night, it's a black and white picture, but still very usable. The camera has a wide angle lens so vehicles a way back are rather small. In the next generation, I'd like to have a zoom feature so it's not quite as wide angle but view further back would be larger. Ahhh, for the perfect world.

Product Page this Question was Asked From
Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 7" Screen
- RV Camera System
- Backup Camera
- Built-In Microphone
- Night Vision
- Waterproof
- Pre-Wired RVs
- Wireless
- Standard View
- Suction Cup Mount
- Rear
- 7 Inch Display
- 1 Camera
- Furrion
more information >
Continue Researching
- Shop: JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Shop: Trailer Valet Drill-Powered Stabilizer Jack - 26-1/2" Lift
- Q&A: How Do I Mount the Back Up Camera for the Furrion Vision S+?
- Q&A: Does Furrion Vision S+ Have to Use Included Power Cable for Monitor
- Q&A: Will Ultra-Fab Steel Roller Fit 2021 Ford Transit Extended
- Q&A: Is Furrion Vision S+ Direct Replacement for Vision S
- Q&A: Is There Furrion Vision S+ Observation System that Doesn't Have Side Cameras
- Q&A: How to Use Furrion Vision S+ Monitor in 2024 Chevy Silverado 3500
- Q&A: Can Side Cameras be Added Later with the Furrion Vision S+ System
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Measure for Trailer Hitch Drop
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups


Scott W.
1/17/2026
Hi Robert GM trucks use a PWM (pulse-width modulation) signal on the trailer light circuits causing the camera to have constant power. The fix is a Furrion 7-way adapter (SKU: 2021132201). I have a ‘25 3500HD and pull a ‘25 GD 367BHS and this adapter fixed the issue. The cameras are now constant drive down the road. Hope this helps!