bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 5 Inch Display
  6. Built-In Microphone
  7. Touch Screen
  8. Anti-Glare
  9. Mirrored Image
  10. Night Vision
  11. Motion Detecting
  12. Waterproof
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
Furrion

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

Part Number: FOS05TASF
In Stock
$507.93
Retail:$727.95
You Save: $220.02
RV Camera System
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The monitor of this camera system displays 4 angles so that you can safely back into a tight space at the campground. Motion sensors automatically power the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV. Great Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen part number FOS05TASF can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (702)
  • Q & A (0)
  • Photos

Furrion RV Camera System - FOS05TASF

  • Backup Camera
  • Observation Camera
  • 5 Inch Display
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • 1 Camera
  • Wireless Signal
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees

The monitor of this camera system displays 4 angles so that you can safely back into a tight space at the campground. Motion sensors automatically power the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.


Features:

  • Wireless backup camera system improves rear-view visibility for your RV or camper
    • Minimizes blind spots and helps prevent accidents
    • Supports up to 4 wireless cameras (additional wireless camera sold separately)
  • Included CMOS camera creates clear digital video in full color
    • 120-Degree viewing angle gives you optimum visibility
    • Integrated motion sensors trigger the monitor to turn on
  • Integrated IR cut filter blocks out infrared light during the day to capture natural-looking images
    • 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 16'
  • 5" Full-color LCD touch screen monitor has a quad screen that displays 4 camera angles simultaneously
    • Auto-dimming, anti-glare screen is easy to see in any lighting condition
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Color-coded, rear assist marker lines show distance from other objects
    • Auto-off setting powers down the monitor after 10, 20, or 30 seconds
  • Integrated microphone and speaker make it easy to get help backing up
    • Microphone on camera picks up your friend's voice outside the RV
    • Speakers on monitor let you clearly hear your friend's instructions
  • Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
    • Eliminates interference from smartphones, routers, and other devices
  • Durable metal housing is waterproof and dust resistant
    • IP65-rated to protect against dust and low-pressure water jet sprays
  • Simple installation - minimal drilling required
    • Monitor suction cups to your windshield or sits on your dashboard
    • Camera mounts to the rear of your RV or camper
  • 1 Camera, monitor, 2 monitor mounts, 12V DC power cord, 6' camera power cable, antennas, zip ties, and mounting screws are included


Specs:

  • Monitor dimensions: 5-5/8" wide x 3-3/16" tall x 1-3/16" deep
  • Screen size: 5"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing (center to center):
      • Horizontally: 3-3/4"
      • Vertically: 15/16"
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.


View Multiple Cameras at Once

Depending on your camera setup, this system allows you to add up to 4 cameras (additional wireless camera sold separately). And you can view all camera angles simultaneously with the touch screen as you're driving down the highway.


Or if you're set up at a campsite for the weekend, the motion sensors on the cameras will automatically power the monitor on if they sense movement in the form of a prowling animal or person.


Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.


Avoid Collisions While Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.


Furrion RV Backup Camera Infrared LEDs

And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.


Withstand Multiple Climates and Environments

If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.


Installs Onto Your Dashboard and RV Rear


Furrion RV Backup Camera Monitor Mounts

This camera system includes 2 different mounting options for the monitor, depending on how you want to display it. You can either use the suction cup to stick it onto your dashboard or windshield. Or you can attach the tabletop mount so the monitor sits on your dashboard, and the 4 non-slip pads will help prevent it from shifting around. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.


Furrion RV Rear Marker Light Camera Installation

Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's wiring system. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.



2021123881 Furrion Vision S Wireless RV Backup Camera System for RVs - Night Vision - 5" Screen

Alt 405235ET

Alt 110449

Replaces 732556

Installation Details FOS05TASF Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

702 reviews
The monitor of this camera system displays 4 angles so that you can safely back into a tight space at the campground. Motion sensors automatically power the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
702
Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Power Adapter For Pulse Width Modulation On 2022 Chevrolet Silverado 2500 To Use Furrion Cameras
    The Replacement Furrion Monitor Power Cable # C-FOS07TAPK-006 powers the monitor. I believe you are looking for the 7-Way Vehicle Power Adapter # FR87PR that eliminates the PWM issue that causes the Furrion Vision S # FOS05TASF cameras not to get the power they need on the trailer. We also have the 12V PWM Filter # VGR64VR that you can wire in line of the camera if you prefer not to have to carry an adapter.
    view full answer...
  • Diameter of Ball of Replacement Furrion Vision S Suction Cup Mount
    The diameter of the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System # LC776462 is 0.60 inches; I used a digital caliper in order to measure this for you. This mount is a replacement for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF. I have added a link to a video review of this suction cup mount for you to check out as well.
    view full answer...
  • Is There a Way to Direct Wire Furrion Observation System Monitor to Vehicle Battery
    What you could do is cut the cigarette lighter plug off of the # C-FOS07TAPK-006 and then run the two wires directly to the vehicle battery and you will have made a way to wire the monitor directly. Most likely the wire would not be long enough so you'd need to extend that with wire you have currently or with 16 gauge wire like part # 16-1-1 which is sold by the foot.
    view full answer...
  • Correct Ball Mounts For The Furrion Vision S Wireless RV Backup Camera System
    I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system # FOS05TASF use part # FR79SR. The smaller 4.3 inch size use the part # LC776462. The ball of the # FR79SR is 0.85" or 21.59mm and the ball of the # LC776462 is 0.60" or 15.24mm.
    view full answer...
  • Correct Replacement Camera for Furrion Vision Wireless RV Backup Camera System FOS48TA-BL
    The Furrion Vision Wireless RV Backup Camera System FOS48TA-BL is the older generation and will not work with the Furrion Vision S Wireless RV Backup Camera part # FCN48TASF which is the new generation. The only other option would be to upgrade to the new generation, the Furrion Vision S Wireless RV Backup Camera part # FOS43TASF for a 4.3 inch screen or the # FOS05TASF for a 5" screen. If you go with the # FOS05TASF, you can add an additional 3 cameras if you wish. We do offer just...
    view full answer...
  • No Power To Furrion Light/Side Camera
    The Marker Light RV Side Cameras part # FCE48TASL for the Furrion Vision S Wireless RV Backup Camera System part # FOS05TASF is powered via the running light circuit. Therefore, if you don't have power to the light/camera you will need to ensure you have power to the running light wire leading to the light/camera. If not, check the vehicle's fuse box for the trailer tow running light or trace the wire back to the trailer connector while checking for breaks. The other two possible causes...
    view full answer...
    Image 1 for
  • Will The Furrion Camera System Work With The In-Dash Display On A 2023 GMC Sierra 2500 AT4
    The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up using the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF then you'll also need to pick up the # VGR64VR because GM now uses PWM wiring which sends pulsing power instead of a constant 12 volts, which causes issues with the camera...
    view full answer...
  • Troubleshooting A Furrion Vision S RV Camera System Monitor That Goes Black When Using View All
    I spoke with Furrion and found that this is a known issue with the wiring on the side marker cameras # FCE48TASL. A lot of people have been installing the trigger wire in with the power wire instead of running it to the turn signal or just capping it off. I've attached an installation video I did below where I show the wires for the cameras at the 6:18 minute mark. You'll want to remove the whole side marker camera from the trailer to get to the wiring and disconnect the trigger wire...
    view full answer...
  • Which Backup Camera Do I Need With 2020 Grand Design Solitude Fifth Wheel
    Your 2020 Grand Design Solitude is pre-wired for the Furrion Vision S Backup Camera system with night vision # FOS05TASF that comes with a 5" display screen. You could also use Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 as well which is the same system, but it comes with blind spot side marker lights with built in cameras.
    view full answer...
  • What Backup/Observation Camera Do I Need for a 2017 Forest River Heritage Glen
    Yes, the Furrion RV Observation Camera System part # FOS05TASF is exactly the system that you will need to use the pre-wired backup camera mounting bracket on your 2017 Forest River Heritage Glen. The part # FOS43TASF that is listed on the bracket is the same version as the above but with a 4.3" screen instead of the larger 5" screen. They both use the same camera, so you won't have any issues. The camera will plug into the bracket you have installed now without any wiring required. Once...
    view full answer...
    Image 1 for
  • Fuse Location In The Furrion RV Backup Camera
    The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item # FOS05TASF only has a 2 amp 125v slow blow fuse in the power cable. If you take apart the portion of the cord that goes into the 12v outlet you'll see the fuse is the portion that moves back and forth and makes contact in the 12v outlet.
    view full answer...
    Image 1 for
  • Does Monitor of Furrion Vision S Wireless RV Backup Camera Need to be Plugged in for Power
    Glad to hear everything has been installed and working great! In regards to the 7 inch monitor of the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF, it does need to be plugged in at all times in order to get power. It will just plug into your tow vehicle's 12 volt outlet (formerly called the cigarette lighter outlet).
    view full answer...
  • Replacement Voyager WiSight Camera for a 2017 Airstream International
    Hi James, thanks for reaching out! If your 2017 Airstream has the WiSight 2.0 system, then we have the part # ASA74YR designed for a pre-wired camera system. If you have the older Voyager system, then there isn't a replacement camera and you'll either need to update to the WiSight System # ASA57YR or go to a different system like the Furrion Vision S # FOS05TASF.
    view full answer...
  • Will Furrion Camera System Work with Camera Package on 2020 GMC Sierra 3500
    We have yet to see any OEM camera on any pickup that is compatible with a Furrion system on the RV so you will need to use a Furrion camera system to utilize the wiring on your RV. I recommend going with the 5" Monitor # FOS05TASF because you can add more cameras if you would like. For example, you can get either of these systems with the rear camera and 2 side-marker cameras with kit # FCE48TASL-05. From what I could tell it looks like the EchoMaster system places the side marker lights...
    view full answer...
  • Will Furrion Vision S Camera Work on 2021 Winnebago Motorhome on Sprinter Chassis
    Hi David, thanks for the question and there is actually a way for your 2021 Winnebago View motorhome to use the Furrion Vision S Wireless RV Backup Camera System - 5" Screen # FOS05TASF. To do so, all you need to do is add the 12V PWM Filter for RV Backup Camera Systems - Hardwire # VGR64VR. The issue with camera systems and motorhomes like yours on a Mercedes Sprinter chassis is that the wiring doesn't send the right amount of power to the camera, and what the filter does is ensure a...
    view full answer...
  • No Signal to Furrion Camera FOS05TASF
    Thank you for your purchase from etrailer of the Furrion Vision S Camera System # FOS05TASF. According to Furrion there are a number of things you can do to try to remedy the situation if you are not getting a signal, to start you should check if the camera antenna is fitted and secured correctly, as it should be vertical. It could also be that the distance between camera and monitor is too great so if possible reduce that distance. There may be interference from electrical appliances...
    view full answer...
  • How to Un-Pair Camera for Furrion RV Observation System # FOS05TASF
    In order to un-pair the camera on your Furrion RV Observation System # FOS05TASF and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. This will un-pair the unit. Once this is done you will just follow the original pairing steps again as outlined in the instructions manual (and also attached below) to set it as the rear camera.
    view full answer...
    Image 1 for Image 2 for
  • Tow Mirror Recommendation for 2020 Ford Explorer
    The best fitting and performing tow mirror solution we have for your 2020 Ford Explorer is the K-Source Tow Mirrors # KS3891-2 which we had the chance to test fit on a 2018 Ford Explorer and found they were very stable and provided a great viewing angle. Check out the review video link I attached for more info on this.
    view full answer...
    Image 1 for
  • Can I Integrate A Backup Camera Using A U-Connect Screen And Furrion Back Up Camera On 2021 RAM 1500
    We can definitely get you setup with a backup camera for your trailer. There will be some things we have to work around to get this setup properly. First, the Furrion cameras will only work with Furrion monitors, so you will not be able to use the U-Connect screen with the Furrion camera. The trailer camera pre-wire package will only work with a backup camera on the truck. The Furrion camera dock will house a camera on a separate system keeping an eye on the rear of your travel trailer....
    view full answer...
  • Looking to Replace a Sony VCB-MHD1 Back Up Monitor.
    The Sony VCB-MHD1 System including rear camera and front dash monitor has been out of production since around 2010, and repair and replacement parts are no longer available from Sony. Even if you found a used replacement, it would already be overdue for failure. A totally new system will have color cameras with a much wider field of vision and night vision. Add to that the wireless connectivity that makes installation much easier. With this in mind I recommend the Furrion # FOS05TASF...
    view full answer...
  • Pairing A Side Marker Camera On The Furrion Vision S Wireless RV Back Up Camera
    The steps to pairing a camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item # FOS05TASF are: 1. Hook up your trailer to your vehicle. 2. Make sure you have power running to your cameras (blue lights will be lit on the cameras). 3. Press the menu button on your monitor. 4. Press the pairing button. 5. Press the camera you choose to pair on the monitor. 6. Hit the little black pairing button on your camera. If you are still having...
    view full answer...
  • Will TireMinder i10 TPMS Interfere With Furrion Vision S Camera
    The TireMinder i10 TPMS for RVs # TM89FR uses a signal booster, which makes it very unlikely for interference to occur with a Furrion Vision S Camera System like parts # FOS05TASF. So long as you have the booster installed, there is no reason to think that any interference will occur. If by chance it does, moving the booster to a different, central location will remedy the issue, but it is not something that is likely to occur. I have added a link to a video review for you to check out...
    view full answer...
    Image 1 for
  • Is Furrion Vision S 7 inch System Compatible with FCE48TASH
    FCE48TASH is an alternate number for FCE48TASL which is the Replacement RV Side Marker Light Camera item # FR28NR and is perfectly compatible with the 7 inch monitor version of the Furrion Vision S part # FOS07TASF.
    view full answer...
  • Do Furrion Observation Cameras for RVs Have Microphones and Speakers
    All of the Furrion observation systems like the part # FOS43TASF, # FCE48TASL-05, and # FOS05TASF have the ability to transmit sound from the camera to the monitor display, but there isn't a way to speak into the monitor and have it project from the camera. So, it is 1-way audio in that regard. I attached an install video for more info for you to check out as well.
    view full answer...


< Previous
123. . .33




Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Matthew E
Updated by:
Matthew E
Employee Cole B
Installed by:
Cole B
Employee Amanda M
Edited by:
Amanda M
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Jacob H
Test Fit:
Jacob H
Employee Aidan B
Test Fit:
Aidan B
Employee Kevin C
Test Fit:
Kevin C
Employee Halie H
Written by:
Halie H
Employee John S
Video by:
John S
Employee Thomas T
Video by:
Thomas T
Employee Kyle M
Video by:
Kyle M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924
<