Looking For 7,000 lb Axle For HD Trailer
Updated 04/17/2025 | Published 04/14/2025
Products Featured in This Question
Question:
Do you have any boat trailer torsion axles in a 7k rating? Needing to build a HD trailer with 4 7k axles. Thanks
asked by: Christopher M
Expert Reply:
Hello Chrisotpher, thanks for reaching out. We do offer some 7K rated axles but our axles are round tube leaf spring axles. We do not offer any torsion axles sadly. We do have some 7K axle-less options that could work for you. I will list a few options for you below. I will also provide links that will show you our full selection of 7K axles.
- Trailer Axle Beam with Easy Grease Spindles - 95" Long - 7,000 lbs # e88GR
- Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs # TASR7KS01
- Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs # e93GR
Leave a reply and let me know if there is anything else I can do to help.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Kenda Karrier KR53 ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel - 8 on 6-1/2
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 95" Long - 7,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 7K
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Where are Alignment Shims Installed on Timbren Axle-Less Suspension Kit
- Q&A: Timbren Axle-Less Replacement System for Outdoors RV Back Country Series 28DBS
- Q&A: Availability of 6k or 7k Axles to Replace Lippert 3,500 lb Axles on Trailer
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Q&A: What is the Best Grease for Trailer Bearings
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Search Results: trailer leaf springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Axles
Christopher
4/17/2025
Dexter makes a 7k bent tube torsion axle. Can you get me a quote. Thanks