Looking For 14" Wheel That Can Be Used With Baby Moon Hubcaps

Question

Question:

I’m looking for a 14 inch trailer wheel for a 2018 Riverside retro 157 It sports white wall, tires, and baby moon hubcap Thank you so much!

asked by: Svelan J

0

Expert Reply:

Hello Svelan, thanks for getting in touch. We do have an option for you. The Dexstar Conventional Steel Wheel # AM20334 is a white 14" rim with a 5 on 4-1/2" bolt pattern. It can be used with the Americana Baby Moon Trailer Wheel Center Cap # AM90086 which will look great if you are going for the white wall/throwback appearance.

We can also do the wheel in black # AM20304 if you prefer that. Please just confirm that your trailer uses the standard 5 on 4-1/2" bolt pattern.

If there is anything else I can help with just leave a reply and I am happy to get back to you.

expert reply by: Jesse M

0

Americana Baby Moon Trailer Wheel Center Cap Example
(click to enlarge)

John

4/7/2025

Thanks Jesse for the reply. Can you please email me the printable boat pattern template Thank you, Johnny

Jesse M.

4/7/2025

@John Its hard to email and keep in at the right scale. Here is a link to a PDF you can print, as well as another link you should find helpful:

Helpful Links

faq-bolt-hole-pattern-template.aspx

faq-wheel-bolt-pattern.aspx

Answer 1

It sure will. You really want to avoid mixing tire sizes, as it can lead to poor handing, uneven tire wear and increased trailer sway. It's acceptable to use a mismatched but close tire size for a temporary spare as long as you get the original…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Looking For 14" Wheel That Can Be Used With Baby Moon Hubcaps

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching