Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need a reliable wheel that can take real-world loads, this one’s up to the task. The Dexstar Conventional Steel Wheel has a 13" diameter and a 4-1/2" width with a 1,480-lb capacity. It meets DOT specifications, so it’s built for consistent performance under weight. The +0.5" offset positions the mounting surface just right for a solid, balanced stance under load.
Corrosion doesn’t get far here. This wheel’s e-coat primer and durable white powder coat finish protect the steel from rust and road grime season after season. Whether you store your trailer outside or tow in wet conditions, the finish stays clean and resists peeling or fading over time.
Getting the right fit is simple with its common 5 on 4-1/2" bolt pattern and 2.62" pilot diameter. The wheel uses 1/2"-20 bolts and maintains proper alignment thanks to its conventional, non-spoked design. That straightforward setup gives you confidence that your replacement or upgrade will bolt up tight and true.
Sometimes simple is best. The solid conventional style gives a clean, timeless look that pairs easily with trim rings or Americana Baby Moon Caps like part # AM90086. It’s an easy way to refresh your trailer’s look while adding a durable wheel that’s made to last.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number AM20212. This is the Americana 13 inch by 4 inch solid center steel trailer wheel with the 5 on 4 inch bolt pattern. It is white in color. This wheel is made of a sturdy steel construction. It has a nice white powder coat finish over an e-coat primer over the whole wheel. It gives you excellent corrosion resistance.
The design of this wheel is the solid center, so it doesnt have any spokes or openings in the wheel itself. This is a high quality wheel which meets the Department of Transportations specifications. The dimension on this is the diameter is 13 inches, the width is 4 inches. If you go to measure that basically what youll measure is when the tire is seated on this wheel it would seat right in here on these bead seats. When you measure the diameter youre going to measure bead seat to bead seat, so inside to inside.
If you put a ruler on that you can see its 13 inches in diameter. Well do the same on the width. The tire seats right in here, so well measure inside to inside, or bead seat to bead seat. You can see 4 inches, so 13 inch diameter, 4 inches wide.The bolt pattern on this is a five lug, f inch bolt pattern and on a wheel that has an odd number of lug holes, like in this case five, what you do is just pick any hole you want to start at, measure from the center of the starting hole directly across the hole across from it and to the outer edge of that hole. So you can go from this hole to either one of these holes, and Ill show you how to measure that.
Were going to measure from the starting hole, the center, to the outer edge or furthest edge. So center to the first edge you can see is 4 inches. So, five lug, 4 inch bolt pattern. It does use a wheel lug size of a half inch by 20. The pilot hub diameter which is this hole, the large hole in the center of the wheel goes over the hub on your trailer, the diameter on thats going to be right at 3.19 inches.
The weight capacity on this wheel is 1,660 pounds.That should do it for the review on part number AM20212, the Americana 13 inch by 4 inch solid center steel trailer wheel with the 5 on 4 inch bolt pattern. .
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
James
10/6/2021
Great, no problems, still look nice, too!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
12/18/2024
I was listening to Elvis Presleys Blue Christmas when I came across this review. I love the retro look of the camper - I think the music set the tone :)