1. Trailer Tires and Wheels
  2. Dexstar
  3. Wheel Only
  4. 14 Inch
  5. 5 on 4-1/2 Inch
  6. Steel Wheels - Powder Coat
Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black

Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black

lowest price pledge
Our Price: $69.36
Trailer Tires and Wheels
Orders above $99 qualify for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
Dexstar Wheel Only - AM20304
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Black powder coated, 14" steel trailer wheel features a 5 on 4-1/2 bolt pattern and meets Department of Transportation standards. Lowest Prices for the best trailer tires and wheels from Dexstar. Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black part number AM20304 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (465)
  • Q & A (44)
  • Photos
  • Used (1)
  • Why etrailer?

Dexstar Trailer Tires and Wheels

  • Wheel Only
  • 14 Inch
  • 5 on 4-1/2 Inch
  • Steel Wheels - Powder Coat
  • Dexstar

Black powder coated, 14" steel trailer wheel features a 5 on 4-1/2 bolt pattern and meets Department of Transportation standards.


Features:

  • Sturdy steel construction
  • Excellent corrosion resistance
    • Black powder coat finish over e-coat primer
  • Conventional design does not have spokes
  • High-quality wheel meets DOT specifications
  • Made in the USA


Specs:

  • Rim dimensions: 14" diameter x 5-1/2" wide
  • Bolt pattern: 5 on 4-1/2"
  • Wheel bolt size: 1/2"-20
  • Pilot diameter: 2.62"
  • Offset: +0.5"
  • Capacity: 2,200 lbs
  • Valve stem hole diameter: 0.453"
  • Limited 2-year warranty


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Side

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


20304DX Dexstar Conventional Black Steel Wheel - 14"

017-114-1T

Item # AM20304






Customer Reviews

Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black - AM20304

Average Customer Rating:  4.8 out of 5 stars   (465 Customer Reviews)

Black powder coated, 14" steel trailer wheel features a 5 on 4-1/2 bolt pattern and meets Department of Transportation standards.

- AM20304
by: 06/14/2021

These rims look good, have a high weight rating and allow use of baby moons. The rims looked good upon delivery with the exception that the edge was slightly bent on one rim - could be shipping or processing. These rims were bought to replace the same type of rim delivered on a 2019 Gulf Stream Vintage Cruiser. The original rims worked fine for three years then one rim cracked at a bend a would not longer hold air.



- AM20304
by:

Wheel arrived 2 days ahead of schedule. Great service on ever6I have purchased from etrailer. Great customer service as well as the product. Good company to do business with.


Comments
Working well after a year
Leslie E - 12/22/2020


- AM20304
by:

Very nice and delivered fast



- AM20304
by:

The wheels and moon hub caps look great on my retro camper.



- AM20304
by:

Exactly what I was looking for and received in two days after ordering. Problem with one and etrailer reshipped right away . Once received had tires mounted on the wheels and on the trailer the same dayand looking good. Put the baby moon cap on and working at finding trim rings to go on as well for the oldies look that I want . Pleased


Comments
Did you find tire rings to fit? If so where did you find them? Thanks..
-- comment by: El - 09/21/2015


Comments
Great and looks good will be buying again for a new trailer when I get it this year or next
Dennis G - 06/29/2016



- AM20304
by:

Great product Great site Easy fast shipping and service after the sale Thanks etrailer



- AM20304
by:

.The service was excellent.The wheels and baby moons are great ,they look super on my restoration project,which is a 1968 Shasta canned ham camper. when finished I will be glad to send a picture.The paint finish on the wheels is great,I am very proud of the looks these added to my project.


Comments
James did you order the tires mounted ? and where did you get baby moons from? have a 73 shasta compact
-- comment by: robert s - 01/02/2016


Comments
this note is to Robert S I only purchased wheels by themselves. I purchased tires in chatt. tn. from cooper tire .I got baby moons off ebay.have received lots of compliments on set up
-- comment by: James P - 01/06/2016



- AM20304
by:

Thank you etrailer for shipping a quality product and incredibly fast! Your always on top of your game and it shows Thanks again



- AM20304
by:

I ordered the Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black - AM20304 as a Father's Day gift and he was thrilled with it! It was exactly what he wanted and fit the utility trailer perfectly. It was not easy finding a replacement wheel this size but I am so glad I found one at etrailer. It was the only place I found that had exactly what he needed and the best price. It looks great - not a scratch on it. I ordered with standard (5 to 7 business day) shipping and received an email from a gentleman at etrailer that my order was given special priority and upgraded to the 3 to 5 Day Express Shipping at no additional cost to me. That is great service! I definitely recommend etrailer. Sharon



- AM20304
by:

I am a first time user. Found old trailer of my dads in the woods hadn't been move for 30 years. Got it out decided to fix it up. Tires were shot. Started searching for used tires and rims. Found that most had used tires a close to new tire prices and no one had any good rims. So I googled and found your site. I really like your site. Straight forward, easy, and informative (very important). After viewing the "how to video" and measuring the old rim, I placed the order (free shipping made the deal). The rims arrived within four days by ups. Took them to my local tire guy had new tires mounted, put them on the trailer and am now using the trailer. The rims look great are heavy duty and were at a very reasonable cost. Check back with me in a few years to see how they are doing and I will let you know. This is more of a review of E-trailer and the process. I am impressed, and looking at ordering some other items for another trailer that needs work. I also have told everyone I know about E-trailer and how easy and professional this process was. Keep up the good work and I look forward to doing business with you in the future.



- AM20304
by:

Just what I needed. The small truck I recently acquired didn’t have a spare. This was the third wheel I ordered from companies. This one actually fit



- AM20304
by:

Awesome service, arrived earlier than quoted which was great..



- AM20304
by:

Just what I needed.



- AM20304
by:

Very pleased with the professional customer service and the product I received. I would highly recommend this company.


Comments
Very happy with the wheels and baby moons hubcaps that I purchase from Your company. They look great and Im so glad I found your company. Would highly recommend them to anyone who needs products for unique trailers
Donna J - 09/22/2020


- AM20304
by:

After speaking with a customer service rep., to insure the correct size, I purchased these steel wheels to replace the original ones on my 24 year old landscaping trailer that was reconditioned earlier this year. The wheels arrived within a week, look great, and displayed stickers proclaiming "Made in the USA". EXCELLENT!!



- AM20304
by:

I damaged a wheel on my camper, and fortunately etrailer had this exact replacement. It matches exactly, price was good, and it arrived very quickly, well-packaged.



- AM20304
by:

I took a leap of faith when I dove into these guys about ordering parts for my trailer. I have to admit, these guys and gals are top notch in my book. I order lots of parts for all sorts of trailers all over the U.S., they came through both on the phone and through delivery. I will be working with these guys and gals from now own. . One big At-A-Boy to the entire crew there from ordering to packaging. Very pleased.



- AM20304
by:

Wheel arrived earlier than I thought they would. They were well packed and are not scratched or bent from shipping. The powder coating is well done and will look great on my 1966 Trend setter travel trailer. I will mount tires and baby moons and then send you a picture of then on the trailer



- AM20304
by:

Like the quality of the wheels hard to be free delivery only possible complaint is the edge of the rims we're not well protected and powder coat is chipped off besides that great products



- AM20304
by:

Like the quality of the wheels hard to be free delivery only possible complaint is the edge of the rims we're not well protected and powder coat is chipped off besides that great products



- AM20304
by:

The wheels arrived quickly and in perfect condition. The folks at etrailer were helpful and answered my questions quickly and completely as well. I'd recommend doing business with them anytime.



- AM20304
by:

About a year ago I purchase 2 rims and 3 valve stems, all items are holding up great. Service has been excellent. I will purchase from here again. Thanks for great quality.



- AM20304
by:

Great product



- AM20304
by:

Great product, quick delivery, especially compared to delivery service we have here in Canada



- AM20304
by:

Product met my expectations + Customer service was excellent with follow-up after purchase delivery. Received my product expiditiously at no extra charge. I would definately recommend etrailers for their future purchases. Totally satisfied.


27
476
Show More Reviews

Ask the Experts about this Dexstar Trailer Tires and Wheels

  • Can A 205-75R/14 Tire Fit a 14 x 5-1/2 Wheel
    When it comes to choosing a rim for a trailer tire, you will want to go with the smallest rim width available for your size of tire to keep the side walls as straight as possible. A 205/75R14 trailer tire like the Kenda, # AM20304, does fit a 5", 5-1/2", 6", or 6-1/2" rim so you would be good to go with this combination. If you are looking for a wheel and tire combination, the Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2 # AM32131 is another option...
    view full answer...
  • Baby Moon With 9-3/8 Inch Diameter Compatibility with Dexstar Conventional Steel Wheels
    The Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black # AM20304 you referenced is a conventional wheel that should work with most baby moons. We have baby moons # AM90086 that I can confirm as a fit that have a slightly smaller inner dimension of 9-1/4 inches. These are a fit for 13, 14, and 15 inch wheels. My contact at the manufacturer said he would be surprised if your baby moons don't fit because they should all be compatible, but we can't confirm...
    view full answer...
  • How to Allow Installation of Trailer Wheel Beauty Rings to Prevent Contact with Valve Stem
    Thank you for the photo showing the fit of your trailer's wheel beauty rings on the original and new conventional steel wheels. I do see that the valve stem on the wheel # AM20304 contacts the ring. This might be a case of the new wheel using a valve stem with a higher pressure rating, which could mean its diameter is larger and that could be why it is making contact with the trim ring. It could also be a case of the 50-year-newer wheel simply having a slightly different profile that...
    view full answer...
    Image 1 for
  • Recommended Tire and Wheel for 205/75-14 Load Range C
    I do have some options for you, however the Dexstar Conventional Steel Wheel with Offset - 14 inches x 5-1/2 inch Rim # AM20304 referenced in your question is currently only available by itself, without the tire. For a 205/75-14 tire to go with the Dexstar Wheel, I recommend the Taskmaster ST205/75R14 # TR20514. This is a radial trailer tire with a ply rating of 6 and a 1,760 pound max load at 50 psi. The tire has a load range C. For a tire and wheel combination, I recommend the Provider...
    view full answer...
  • How to Determine the Correct Replacement Trailer Wheel for a Little Guy 5x8 Silver Shadow
    Your trailer probably does have conventional steel wheels or otherwise regular trailer wheels. To determine which wheel is the correct one for your trailer you will need to look at a few things. First you will want to look at the size of the existing wheels. You will need to measure the diameter of the wheel and the width from bead seat to bead seat. The tire has to be removed for the width. I can also determine the size of the wheel if you can tell me the tire size. You will also need...
    view full answer...
  • Choosing a Trailer Rim with Positive Offset to Increase Side Clearance
    Narrower tires and rims will certainly help you pick up some side clearance for fitting your boat trailer into your garage. A wheel with positive offset will also help by shifting the wheel's center closer to the trailer frame. Since you have 1-1/2-inches of extra clearance between the tires and trailer frame, 0.5-inch positive offset rim # AM20304 will give you a total of 1-inch additional clearance (1/2-inch on each side). Be sure to use only special trailer (ST) type tires on your...
    view full answer...
    Image 1 for
  • What is the Backspacing of Dexstar Conventional Steel Wheel with Offset # AM20304
    The backspacing of Dexstar Conventional Steel Wheel with Offset # AM20304 is 3-3/4-inches. Maximum load capacity is 1,870 lbs at 50 psi.
    view full answer...
  • Availability of 14 inch Trailer Rim with Positive Offset
    The largest positive offset 14 inch trailer rim is the part # AM20304 which has a 1/2 inch positive offset. Most trailer wheels have a zero offset or right at zero since it helps distribute the load of the trailer on the wheel. This wheel also has a 5 on 4-1/2 inch bolt pattern. I attached a review video for this wheel for you to check out as well.
    view full answer...
  • Availability of Trailer Wheel Similar to AM20304 with Zero Offset
    Probably the most similar wheel we have to the # AM20304 that you referenced that does have a zero offset would be the part # AM20353. It is the same diameter, width and bolt pattern. I attached a review video for more info on it as well.
    view full answer...
  • Can Dexstar # AM20304 Conventional 14 x 5-1/2 Steel Wheel Be Used on Passenger Vehicle
    The Dexstar Conventional Steel Wheel, part # AM20304 could be used on a passenger vehicle, as long as the vehicle's hubs use a 5 on 4-1/2 inch bolt pattern and the wheel's 1870 lb capacity isn't exceeded (7480lb for 4 wheels.) The wheel has a 1/2 inch positive offset, which means that the wheel mounting pad isn't perfectly centered along the width of the wheel, rather it's moved closer tot he vehicle by 1/2 an inch.
    view full answer...
  • 5 Lug Conventional Trailer Wheel to Fit Over Caliper and Rotor that's 13-1/2 inch in Diameter
    If you need 13-1/2 inches to fit over the brake calipers of your trailer you'd have to go to the 15 inch conventional trailer wheel part # AM20504 as the 14 inch version you mentioned wouldn't be large enough.
    view full answer...
    Image 1 for
  • Recommended 14 Inch Wheel and Tire for Vintage Trailer
    While we definitely have 14 inch, 5 lug wheels and tire combinations it would not be possible to match any up to 1966 hub caps as it will depend on how they fit into the wheel. For a wheel you may be able to use the Dexstar Conventional Steel Wheel # AM20304 which has a 5 on 4-1/2" bolt pattern. If you are unsure of your exact bolt pattern I have added a link to a help article which details exactly how to find it. A conventional wheel is generally going to be the best for the use of...
    view full answer...
  • Wheel and Tire Recommendation for Size 205/75-14 that Can Have Baby Moon Covers Installed
    For a 14 inch wheel that can have a baby moon cover installed on it we have the # AM20304. Then for a baby moon cover to fit that wheel you would want the part # AM90086. You should note that this wheel has a lug bolt pattern of 5 on 4-1/2 inch. It's the only bolt pattern we have in this style of wheel. For a 205/75-14 sized tire we recommend the part # AM10235 which is the size you want, is a radial which is preferred over bias ply, has a speed rating of 75 mph, and has a 2 year roadside...
    view full answer...
  • Need 14x5-1/2 Inch Travel Trailer Wheels With 5-on-4-1/2 Bolt Pattern
    The link provided will take you to our product page for trailer wheels in the 14 x 5-1/2 inch size that have a 5-on-4-1/2 inch bolt pattern you require. A wheel suitable for your 65-lb-psi Kumho 857 tires is Dexstar # AM20352, which offers a 2040-lb capacity at 65 psi.
    view full answer...
  • Recommended Wheel for 205/14R Trailer Tires
    The recommended wheel width range for your tires are 5”, 5-1/2”, 6”, and 6-1/2” rims. For a trailer tire, the narrowest possible rim option is going to be the best because it provides more support for the tire. I recommend our Dexstar, part # AM20304. It's a conventional steel wheel with a 5 on 4-1/2 bolt pattern.
    view full answer...
  • 14 inch Trailer Wheel with 5 on 4-1/2 inch Bolt Pattern with Pilot Diameter of 2.62 inches
    The part # AM20304 is the only rim we offer that fits the criteria you listed. The pilot diameter of 2.62 inches that you mentioned is only associated with conventional wheels like this.
    view full answer...
  • Recommended Wheels and Tires for 1965 Aristocrat Trailer
    The Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black # AM20304 is the older style wheel with a capacity of 1,870 lbs. The benefit to these wheels is the option to use the baby moon caps # AM90086 for the classic styling. The Dexstar Steel Spoke Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat # AM20352 is pretty much the industry standard in style and function and what comes on most factory trailers. It has a capacity or 2,040...
    view full answer...
  • Can Trailer Wheels be Used on Vehicle
    No, the wheels we sell are specifically intended for trailer applications and are not suitable for use on a vehicle, even if the bolt pattern matches. Trailer wheels differ in their amount of offset, which is the placement of the actual tire tread relative to the wheel center line. Trailer wheels often have no offset while vehicle wheels can have the offset required to correctly position the tire in the wheel well. Use only vehicle wheels on a vehicle and use only trailer wheels on a trailer. I...
    view full answer...
  • Black 14 inch Trailer Wheel Recommendation with Load Range D Tire
    For a black 14 inch diameter wheel with a 5 on 4-1/2 inch bolt pattern you would want the # AM20304. For a Load Range D radial tire in the size of ST215/75R14 to go along with this rim you would want the part # TTWTRTM2157514D. While a wheel and tire combo isn't available in the configuration you are looking for these two parts would work great together.
    view full answer...
  • Does Pilot Diameter of Replacement Wheel Need to Be Same as Existing Wheel
    The answer to your question will depend on whether your wheels are hub centric or lug centric. Hub centric wheels center on the hub using the portion of the hub bore extending through the pilot opening in the wheel. Lug centric wheels center on the hub using lug nuts. Hub centric wheels typically use wheel bolts rather than lug nuts to attach to the hub. Hub centric wheels are more commonly found on import vehicles and are not too common for use on trailers. If your wheels are hub...
    view full answer...
  • Availability of 1-Inch Positive Offset 14-Inch Trailer Wheels
    You are correct that a wheel with positive offset moves the tire closer to the trailer. We do offer 14-inch wheels with positive offset but none has the 1-inch you are looking for. For example, we offer the Dexstar Conventional Black Steel 14-Inch Wheel with Offset # AM20304 but this has 1/2-inch of positive offset. You will also need to make sure you select a wheel with the appropriate bolt pattern; the part referenced above has a 5-on-4-1/2-inch bolt pattern. The link provided will...
    view full answer...
  • Will Dexstar Rim AM20304 Match Existing Rims For 1966 Plymouth Satellite
    As long as the bolt pattern (5 on 4-1/2 inches) and offset (+.5 inches) fit then it should work. I would certainly double check your measurements and keep in mind that this wheel is for 14 inch tires. I have also attached an article on determining bolt patterns that will help. Otherwise, you should be good to go. Additional information and video attached.
    view full answer...
  • What is Back Spacing of Dexstar 14 x 5-1/2-Inch Conventional Steel Trailer Wheel AM20304
    Dexstar Conventional Steel Wheel # AM20304 has a pilot hole diameter of 2.62-inches which is noted in the item's specs. This wheel has 1/2-inch of positive offset, meaning that the center of the tire will be 1/2-inch closer to the trailer than the wheel mounting surface. For the back spacing I checked with my Dexstar contact. He advised back spacing is going to be in the range of 3.32-inches to 3.44-inches.
    view full answer...
  • Which Tire Stem Valve Fits in the Dexstar Conventional Steel Wheel with Offset?
    I went out to the warehouse and measured the rim hole diameter of the Dexstar Conventional Steel Wheel with Offset # AM20304 and the correct stem valve for this would be the Americana # AM20903, which has a rim hole diameter of 0.453 inches.
    view full answer...
  • Needing 14 Inch Wheel With 5 on 4-1/2 Inch Bolt Pattern and 2-1/2 Inch Pilot Diameter
    A 14 inch trailer wheel with a 5 on 4-1/2 inch bolt pattern will typically have a 3.19 pilot diameter, but we offer two exceptions that come pretty close to the 2-1/2 inch pilot you're looking for. The Dexstar Conventional Steel Wheel, part # AM20304 for black or # AM20334 for white both have a 2.62 inch pilot diameter. This isn't the exact pilot diameter you were looking for, but the wheel's pilot diameter only matters if you're needing a hub centric wheel. A hub centric wheel will...
    view full answer...
  • 14 Inch Trailer Wheels With an Offset
    Yes there are! In fact, there are two - the Dexstar Conventional Steel Wheel # AM20304 is a 14" wheel with a +0.5" offset and has a 5 on 4-1/2" bolt pattern and has a Black powder coat finish. The other option is the Dexstar # AM20334 which is exactly the same but has a White powder coat finish.
    view full answer...
  • Available Baby Moon Hub Caps
    We do offer two sizes/styles of baby moon hub cap that are intended for conventional steel trailer wheels like # AM20304. These are parts # AM981306 and # AM90086. Part # AM981306 works with 6-lug 15-inch wheels and has an inside diameter of 10-1/4-inches. Part # AM90086 work on 5-lug wheels of 13, 14 or 15-inches; and it has an inside diameter of 9-1/4-inches as shown in the linked photo.
    view full answer...
    Image 1 for
  • 14 Inch Diameter Trailer Wheel with 5-on-4-1/2 Inch Bolt Pattern and 2-5/8 Pilot Diameter
    Assuming that by 4.5 hole, you mean that your hub has a 5 lug on 4-1/2 inch bolt circle, we do indeed have a 14 inch diameter wheel that has a 2.62 (2-5/8) inch diameter pilot hole. The Dexstar 14 x 5-1/2 conventional steel wheel, part # AM20304 would work well for you. To confirm your bolt pattern, take a look at the FAQ article I've linked for you.
    view full answer...
  • Spare Tire and Wheel Recommendations for a Nitro Dual Axle Boat Trailer
    The 14 inch tire on your boat trailer is most likely a 5 on 4-1/2 bolt pattern. You will need a 14 inch wheel to match the other wheels on your trailer. I have included a link to an FAQ that shows how to measure for bolt pattern. The wheel that you referenced, # AM20504, is a 15 inch wheel and it has an offset which is not all that common. If you just want a wheel, # AM20352, is the most common. In the event that your wheels do have an offset, you would use # AM20304. For a standard...
    view full answer...
  • How Can Offset be Determined for Trailer Tires on a Trailer
    I do have a solution for you but we don't recommend using a spacer as that will cause your wheel to sit at a different location on your lugs. The offset of a wheel can be determined by measuring from the mounting surface of the wheel (where it mounts to your hub) to the inside and outside beads once the wheel has been removed from your trailer. The difference of these measurements tells you what your offset is. Most trailer tires have an offset of zero but if your wheel has a negative...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Tires and Wheel?


Used Items Available
Used Picture for Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
Used Picture for Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
Used Picture for Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
Used Picture for Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black

Condition: Surface Scratches

Notes: Item has minor cosmetic paint chips/ surface scratches around the edge of the wheel. Otherwise new and unused.

Our Price: $64.22
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer tires and wheels for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer tires and wheel information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Mary E
Updated by:
Mary E
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624