Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You bet, Alan. That’s exactly the kind of versatility the Yakima SkyBox NX Skinny Rooftop Cargo Box (Black Carbonite) #Y93QD is designed for. Since its only 26-1/2inch wide, it leaves enough room on most standard crossbars like a 54inch or 60inch bar…
view full answer...Hey Jaime. It sounds like you've got a bad trailer connector on your Tacoma or something wrong with the wiring between your connector and your fuse box. A lose ground or corrosion on your connector would be the first place to look. Corrosion can…
view full answer...The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…
view full answer...The standard RV roof vent size is 14 inch by 14 inch like the #MA00-04301M. There isn't a 10 inch by 10 inch roof vent.
view full answer...Hey Zachary, What kind of specs are you needing for the Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks #TJD-12000-RSP? It's designed to work with 10k rated etrailer and Ram square jacks. While retracted the spring is…
view full answer...Without any identifying information on your trailer jack it's just a guessing game at this point. If you do end up taking your jack apart and it's rated for 10K then you just need to measure the spring to ensure the Replacement Return Spring…
view full answer...According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…
view full answer...For the Bulldog trailer jack #BD195362 we have the replacement bevel gear kit part #BD500106, bearing kit #BD500251, and replacement handle #BD500105.
view full answer...When the MaxxAir MaxxFan Deluxe #MA00-05301K is in the open position it sits above the roof 9-5/16" but when it is in the closed position it sits above the roof only 5". If you check out the linked review video our team member mentions this…
view full answer...Based on the dimensions you listed the equalizer you need is the part #TREQE1. This equalizer has 7-3/4 inches between the mounting holes from left to right and 2-7/8 inches vertically.
view full answer...Thank you for providing the original grease seal number that you wish to replace, part #3077. This is usually the best way to find a replacement. Unfortunately, we have no cross reference for this part number. The other route to find a replacement…
view full answer...The correct way to wire your breakaway battery, like the Hopkins Engager #20400, is to have the black wire from the battery connected to the 12V power on your trailer, and then the blue wire to your breakaway switch which, in turn, connects to the…
view full answer...