Spring Seat Spacing for the etrailer 4-Leaf Double Eye Springs
Updated 10/30/2025 | Published 02/24/2025 >
Products Featured in This Question
Question:
What would the spacing between brackets need to be to mount part E77SR 26” double eyed springs?
asked by: Caleb
0
Expert Reply:
Hey Caleb, it looks like the spring seat spacing for the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # E77SR is 13-1/3" so that's the spacing you'd need.
What kind of trailer do you have? Any cool trips planned? Let me know if there is anything else I can do for you!
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Search Results: spring kit
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Shop: Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Search Results: castle nut
- Search Results: trailer leaf springs
- Search Results: leaf spring hanger
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Q&A: How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
- Q&A: Replacement Parts to Rebuild Trailer Suspension on 1976 EZTrail
- Q&A: Can Trailer With 1-3/4 Inch, 2,000 lb Slipper Springs Change to Double Eye Springs
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: What Comes with Trailer Axle # e25GR
- Search Results: spring hangers
- Q&A: Replacement Hub that Has Bearings L44649 and Bolt Pattern 5 on 4-1/2 inch
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Leaf Springs For An Ice Shanty Trailer
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review



Jesse M.
10/30/2025
Hey Caleb, how did things go setting the 13-1/3" spring seat spacing for your double-eye springs? Your update could make it easier for others working on a similar trailer setup.