Can Trailer With 1-3/4 Inch, 2,000 lb Slipper Springs Change to Double Eye Springs
Updated 10/17/2022 | Published 10/15/2022
Products Featured in This Question
Question:
I have a 1997 2000 lbs 4x8 Fair West utility trailer a gross weight of 2300 lbs with 26-1/4” long by 1-3/4” wide 5 leaf slipper springs my question is can I switch to double eye and what modifications and parts I need for my trailer
asked by: Albert V
Expert Reply:
Yes, you can change from 1-3/4 inch slipper springs to double eye springs on your trailer. You will need to have the slipper end hanger removed and have a new hanger welded on which allows the leaf spring to sit at the same height. Or you could replace all of your hangers with a brand new kit if you like, and I have added a link below to our entire selection of hangers and hanger kits for you.
Then you just need the leaf spring and bolts, and for your 26-1/4 inch springs I recommend a 26 inch spring because leaf springs elongate a bit over time. So you can use the following:
- 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR
- Shackle Bolt with Locknut for Double-Eye Springs - 3" Long # 166081
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Search Results: spring kit
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Search Results: trailer leaf springs
- Search Results: leaf spring hanger
- Q&A: Spring Seat Spacing for the etrailer 4-Leaf Double Eye Springs
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Replacement Parts to Rebuild Trailer Suspension on 1976 EZTrail
- Q&A: How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
- Search Results: castle nut
- Q&A: What Comes with Trailer Axle # e25GR
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Suspension Parts
