Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Curt! I wouldn't get too caught up in the axle spacing for the E-Z Flex Equalizers #K71-655-00. The best thing you can do is measure your existing equalizer. If your measurement from left to right bolt hole on center is 7-3/4" then this…
view full answer...Hello again Adam! Since you have 7k Lippert axles the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is the correct kit. This is going to be a significant improvement over the stock suspension. For wet bolts you…
view full answer...Hey David, thanks for reaching out! To replace the leaf spring that fits with your 5,200 lb Lippert axle you likely need the 26" Long 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e94SR, but you'll need to measure from center-eye to…
view full answer...In regards to trailer suspension, it's always best to swap parts with identical replacements when doing any work so you don't run into issues like you're having now with components binding or making contact. That said, I do understand…
view full answer...Hey Brian. To convert the WFCO WF-8955PEC to be lithium compatible you'll need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel item #PD4655V. This converter section is specifically designed to replace yours. It…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...In the attached diagram the A measurement is actually the distance from the center of the spring hangers for a single axle trailer. The spring eye to spring eye measurement for your leaf springs will be slightly different. The B measurement that you…
view full answer...25-1/4 inch leaf springs are a very common length. For a leaf spring that is rated for a 2,500 lb axle that is 25-1/4 inches long you would want the part #e66SR. If instead you meant 2,200 lbs per spring you would want the #e44SR instead.
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...Hey Chris. There isn't a Comfort Ride Leafspring kit with 25 1/4" springs but that's ok you found the right one for 6,000 lbs axles. You're giving up the shackle straps and equalizers so the distance will even out. The Roadmaster…
view full answer...Hi Paul! The Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear #CES32WR will fit the standard 1-3/4" double eye leaf springs. There are a few other sizes of double eye springs, but they are extremely…
view full answer...I spoke with Lippert and they said the Kwikee Electric RV Step Complete Assembly, 40 Series, #LC3726892 will be a direct replacement for the Coach Steps 725-0043. It will be a bolt-on install for replacement of the steps.
view full answer...