Search: spring kit   >  

A 15x6 inch size wheel is normally interchangeable with a 15x5 size wheel. The 6 inch and 5 inch measurement being the width of the wheel. A tire will normally fit on a range of wheel widths. Where you want to pay attention to the different widths…

Yes, the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs item #HAP-105-205-01 will work with Universal Group 6-Leaf Slipper Spring item #e39SR. These slipper springs are 29-1/2" Long. You will want to ensure the…

The best slipper spring option for your Triton PWC trailer is going to be the Slipper Spring part #SP-039275 as it's for up to a 2,900 lb axle, is a 3-leaf setup, and is 1-3/4 inches wide. It does have a flat end though and not a radiused end…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

If you use the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs #HAP-105-205-01 that you referenced you'd end up with a height of 4-7/8 inches between the axle center and the frame of the trailer and 8 inches between the tires…

The 42 spindle takes a 5,200 lb hub like part #AKHD-655-6-EZ-K and uses bearings #25580 and typically #15123. The hub kits do not include the spindle washer, lock nut, or stud nuts as those come with the spindle. Included are video resources for…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

If your bed liner is the spray-in type, you can simply install the fifth wheel hitch rails directly on top of it. However, if your bed liner is the hard plastic drop-in type, the liner would need to be trimmed away so that the bed rails have direct…

I was able to find more info on your slipper spring. Looks like you have a Dexter 5115 slipper spring that is 27-1/2 inches long and has a 4k capacity. I attached a picture that has all of the hanger spacing dimensions needed when installing this…

Normally the trailer ramp springs like the #362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.

To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you…