How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
Updated 03/02/2020 | Published 10/13/2019
Products Featured in This Question
Question:
I have a 26 inch leafspring SP-051275 and i have the hanger kit APS4. I was researching and think 25 1/2 hanger spacing is correct but was hoping you could confirm before i weld them up. thanks
asked by: Jason
0
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: equalizers
- Search Results: rv latch
- Search Results: leaf spring shackle
- Search Results: equalizer
- Shop: B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls - 2-1/2" Hitch - 10K/21K
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long - EMCO
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Search Results: leaf spring bushing
- Shop: 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Search Results: stabilizer jacks
- Shop: Hopkins Endurance Metal Trailer Connector - 7-Pole RV Style - Trailer End
- Shop: Pollak Metal 7-Pole, RV-Style Trailer Connector - Trailer End
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Shop: Fluid Filters
- Shop: Air Filter
- Shop: BOLT brand vehicle and hitch locks
- Shop: Brake Controller
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Video: Set up: Curt Spectrum Brake Controller w/ Custom Harness on a 2021 Chevrolet Colorado
- Video: etrailer Bolt-On Swivel Trailer Jack Mounting Plate Review
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Replacement Leaf Spring for a Nitro Z-18 Boat Trailer
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
Explore Expert Info
![Our Expert]()
on Trailer Leaf Springs
on Trailer Leaf Springs
Mark P.
2/29/2020
I am not sure if I need the 4 leaf 25 in springs or the 4 leaf 26 in springs. I have the 2 square axle tubing for my 19ft boat. It is a 1999-2000 Wesco trailer. My springs are flat and everything is rusted. I recently purchased new 2square mounting bolts and the links from you guys, but still not confident in the proper spring size other than I know they are 4 leaf. The original hangers are in good shape and still mounted. The back hanger is narrower than the front which bolts directly through the spring. I need 2 new bolts for the rear hanger that just bolts through the hanger and the links. Are they shorter than the lower bolts that go through the spring and links on each side? Thank you.