Differences Between the Curt Wiring Harnesses for a 2016 Dodge Grand Caravan

Question

Question:

Curious about wire harness for 2016 Dodge Grand Caravan, what is the difference between the two Curt kits? Is the circuit still 10 amp fuse?

asked by: Craig G

0

Expert Reply:

Hey Craig, there isn't really a difference between the Curt # C59236 and # C56331. The main difference is that # C56331 is custom so it'll plug in line with your OEM wiring, and # C59236 is universal and can be spliced into any vehicle's wiring.

As far as fuses go, the custom # C56331 one has to be fused at 10 amps max, and the universal one # C59236 has to be fused at 15 amps max.

Let me know if there is anything else I can help you with!

expert reply by: Bryce D

0

Jameson C.

11/3/2025

Hey Craig, how did things go with the Curt wiring harness for your Grand Caravan? Did the fuse setup work out the way you expected? Your update could make it easier for the next person comparing those two kits.

Answer 1

I have a way you can verify what wiring connector you need. Since I do not have access to the vehicle specs of your 2021 Mitsubishi Outlander Sport, the only way to verify what plug style you have on your taillights, you need to physically check the…

view full answer...

Answer 2

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Mazda CX-5, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you…

view full answer...

Answer 3

Since the Draw Tite Hitch part #76138 that fits your 2021 Mazda CX-5 has a slightly higher towing capacity than the Curt #C13315 it would be my recommendation as best option. If you were looking for trailer wiring too the Tekonsha kit part #118746 is…

view full answer...

Answer 4

Hey Briawnna, The Draw-Tite Max-Frame Trailer Hitch Receiver #76138 has a 3.5" measurement from the center of the hitch pin hole back to the end of the receiver tube so it would work with your VelociRAX 412 bike rack. This hitch also has a 675lb…

view full answer...

Answer 5

For your 2021 Mazda CX-5 I recommend going with the Curt Trailer Hitch Receiver #C13315 you mentioned over the Draw-Tite #76138 due to the Curt hitches being made in the USA, and them having a tougher powder coat finish which we have noticed holds up…

view full answer...

Answer 6

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

view full answer...

Answer 7

Absolutely! For your 2021 Mazda CX-5 there are a few different Class III Trailer Hitch options, the Draw-Tite #76138, the Curt #C13315, the etrailer #e98902, and lastly the #EH68VR. Starting with the similarities each of these hitches has a hidden…

view full answer...

Answer 8

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 9

The best hitch for a 2024 Mazda CX-5 is the etrailer item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This hitch is custom fit and bolts to your Mazda with included hardware. The etrailer hitch item #e98902 is a…

view full answer...

Answer 10

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 11

The Curt trailer hitch part #C13315 and the Draw-Tite hitch part #76138 for the 2019 Mazda CX-5 are both very similar since they are both 2" hitches and require the same exact installation process on the 2019 Mazda CX-5. However, the Curt hitch…

view full answer...

Answer 12

Hi Richard, For a 2024 Mazda CX-5 you'll need the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit #C59496. This wiring kit will splice into your tail light wiring and require you to run a power wire to the…

view full answer...

Differences Between the Curt Wiring Harnesses for a 2016 Dodge Grand Caravan

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching