Curt vs. Draw-Tite Trailer Hitch Comparison for 2021 Mazda CX-5

Question

Question:

Which hitch is best for a 2021 CX-5: Curt or Draw-Tite? TIA.

asked by: Han N

0

Expert Reply:

Since the Draw Tite Hitch part # 76138 that fits your 2021 Mazda CX-5 has a slightly higher towing capacity than the Curt # C13315 it would be my recommendation as best option.

If you were looking for trailer wiring too the Tekonsha kit part # 118746 is best option as it has easiest install and most reliable converter box.

expert reply by: Jameson C

0

Answer 1

For your 2021 Mazda CX-5 I recommend going with the Curt Trailer Hitch Receiver #C13315 you mentioned over the Draw-Tite #76138 due to the Curt hitches being made in the USA, and them having a tougher powder coat finish which we have noticed holds up…

view full answer...

Answer 2

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 3

The Draw-Tite Class III hitch, part #76138 is indeed a fit for a 2022 Mazda CX-5. Because the muffler on your vehicle is very large and is positioned at the center of the vehicle, it'll need to be temporarily lowered as shown in the linked…

view full answer...

Answer 4

I do have a solution for you to carry both of your bikes with your Mazda CX-5 but unfortunately an adapter like part #HTAD isn't the way that I recommend going. Not only does it cut the weight rating of your trailer hitch in half, it will also…

view full answer...

Answer 5

Absolutely! For your 2021 Mazda CX-5 there are a few different Class III Trailer Hitch options, the Draw-Tite #76138, the Curt #C13315, the etrailer #e98902, and lastly the #EH68VR. Starting with the similarities each of these hitches has a hidden…

view full answer...

Answer 6

I have a way you can verify what wiring connector you need. Since I do not have access to the vehicle specs of your 2021 Mitsubishi Outlander Sport, the only way to verify what plug style you have on your taillights, you need to physically check the…

view full answer...

Answer 7

At this time, a plug an play wiring harness is not available for the 2022 Mazda CX-5. The only option is the Vehicle Wiring Harness with Installation Kit #C59496. This is a universal splice in harness that will provide you with a 4-way to power your…

view full answer...

Answer 8

Hi Richard, For a 2024 Mazda CX-5 you'll need the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit #C59496. This wiring kit will splice into your tail light wiring and require you to run a power wire to the…

view full answer...

Answer 9

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

view full answer...

Answer 10

Hey Linden, thanks for reaching out. That is a great question actually because the #C59236 and #C59496 are extremely similar. Basically, both are the same kind of universal hardwire 4-flat harness with install kit. The #C59496 is a kit that we…

view full answer...

Answer 11

The Curt trailer hitch part #C13315 and the Draw-Tite hitch part #76138 for the 2019 Mazda CX-5 are both very similar since they are both 2" hitches and require the same exact installation process on the 2019 Mazda CX-5. However, the Curt hitch…

view full answer...

Answer 12

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Curt vs. Draw-Tite Trailer Hitch Comparison for 2021 Mazda CX-5

Products Featured in This Question

Continue Researching