Recommended Trailer Wiring Harness For A 2024 Mazda CX-5

Question

Question:

I’m looking for a trailer light wiring harness for a 2024 Mazda CX5

asked by: Richard H

0

Expert Reply:

Hi Richard,

For a 2024 Mazda CX-5 you'll need the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496. This wiring kit will splice into your tail light wiring and require you to run a power wire to the battery to prevent pulling power from the tail lights and dimming them.

expert reply by: Kevin C

0

Answer 1

Absolutely! For your 2021 Mazda CX-5 there are a few different Class III Trailer Hitch options, the Draw-Tite #76138, the Curt #C13315, the etrailer #e98902, and lastly the #EH68VR. Starting with the similarities each of these hitches has a hidden…

view full answer...

Answer 2

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 3

For your 2021 Mazda CX-5 I recommend going with the Curt Trailer Hitch Receiver #C13315 you mentioned over the Draw-Tite #76138 due to the Curt hitches being made in the USA, and them having a tougher powder coat finish which we have noticed holds up…

view full answer...

Answer 4

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

view full answer...

Answer 5

A support strap, like part #18050, is required by warranty on many Curt trailer hitch receivers for non-towing applications. However, the Curt Class III hitch for a 2017 Mazda CX-5, part #C13315, does not have this requirement. I verified with Curt…

view full answer...

Answer 6

The Curt trailer hitch part #C13315 and the Draw-Tite hitch part #76138 for the 2019 Mazda CX-5 are both very similar since they are both 2" hitches and require the same exact installation process on the 2019 Mazda CX-5. However, the Curt hitch…

view full answer...

Answer 7

I recommend our etrailer Trailer Hitch Receiver #e98902 for your 2024 Mazda CX-5. I prefer this receiver as it has the hidden cross tube and a matte black finish for a clean factory appearance. The Curt Powered Tail Light Converter #C59496 will give…

view full answer...

Answer 8

The Draw-Tite Class III hitch, part #76138 is indeed a fit for a 2022 Mazda CX-5. Because the muffler on your vehicle is very large and is positioned at the center of the vehicle, it'll need to be temporarily lowered as shown in the linked…

view full answer...

Answer 9

I have a way you can verify what wiring connector you need. Since I do not have access to the vehicle specs of your 2021 Mitsubishi Outlander Sport, the only way to verify what plug style you have on your taillights, you need to physically check the…

view full answer...

Answer 10

I recommend our etrailer Trailer Hitch Receiver #e98902 for your 2024 Mazda CX-5. This receiver has the more commonly found 2" receiver opening allowing for a larger selection of hitch mounted accessories and ball mounts. It also has the matte…

view full answer...

Answer 11

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 12

The best hitch for a 2024 Mazda CX-5 is the etrailer item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This hitch is custom fit and bolts to your Mazda with included hardware. The etrailer hitch item #e98902 is a…

view full answer...

Recommended Trailer Wiring Harness For A 2024 Mazda CX-5

Products Featured in This Question

Continue Researching