Does the Receiver Extend 4-1/2" Past the Hitch Pin Hole Towards the Front of the 2021 Honda CR-V?

Question

Question:

Does this hitch: Identify that you have at least 4 ½” from your hitch pin hole towards the front of your vehicle. Doing so will ensure that the Hitchgate will be able to engage its wedge lock design eliminating any wobble or play in your receiver that you may have. For 21 CRV Hybrid Touring and Hitchgate Solo from Wilco Offroad carrying full size spare tire. Thanks

asked by: Charlie O

0

Expert Reply:

The etrailer Hitch item # e98848 does not have 4-1/2" of clearance towards the front of the vehicle due to an additional support that attaches at the end of the receiver. This additional support is common amongst all the available hitches for the 2021 Honda CR-V.

expert reply by: Jerred H

0

Charlieo

10/29/2024

Herred, Do you know of a hitch that does have that 4.5" that will fit a 21 CRV hybrid? Thanks.

Jerred H.

10/29/2024

@Charlieo No, I do not. They all require that additional support brace.

Charlieo

11/1/2024

@JerredH Slightly less demanding tire carrier. Does this hitch do it? The hitch will need to be within the following parameters: - The distance from the center of your hitch pin to the back of your hitch (toward the front of your vehicle) Minimum 3.75" (if open back) 4" (if plated back) - The distance from the center of your hitch pin to the furthest protruding point on your bumper Maximum 4.5

Jerred H.

11/3/2024

@Charlieo Sorry, still no.

See All (4) Replies to Charlieo ∨

Answer 1

Hey Dave, thanks for reaching out! The hitch I recommend picking up for your 2025 Honda CR-V Hybrid is the etrailer Trailer Hitch Receiver #e98848 because of the matte black finish. This not only looks better but it's also more durable than the…

view full answer...

Answer 2

If you check out the attached picture you can see it basically sits flush.

view full answer...

Answer 3

When installing a hitch like the etrailer #e98848, you may or may not need the sensor relocation kit; we've seen some customers that have reported that the hands-free lift gate still works but that it requires touching a very specific spot and…

view full answer...

Answer 4

Sometimes we've heard that someone can get the sensor to pick up their foot to either side of the hitch receiver, like the etrailer #e98848 for your 2021 Honda CR-V Touring, but this isn't a concrete thing and can be hit and miss as…

view full answer...

Answer 5

The etrailer class 3 hitch #e98848 will affect the hands free lift gate sensor on a 2024 Honda CR-V. It is difficult to give a firm answer to this question, as we have received varying reports on the functionality of the sensor with the hitch…

view full answer...

Answer 6

The etrailer Trailer Hitch Receiver #e98848 will work for your 2022 Honda CR-V to include the Hybrid model. I do also recommend getting a locking hitch pin to keep your accessories safe from theft. The etrailer Trailer Hitch Receiver Lock For 2"…

view full answer...

Answer 7

Based on the manufacturer and our customer feedback we know that the etrailer hitch part #e98848 does fit the 2021 Honda CR-V Hybrid Touring models. We've found that people still retain of the hands free liftgate with this hitch installed but the…

view full answer...

Answer 8

The installation instructions for the Honda Hands-Free Sensor Relocation Kit part 08U59-TLA-100A will come with the kit but as we do not offer this kit, I would not have those instructions for you. That said, the above kit is not always required…

view full answer...

Answer 9

Right off the bat the best option is the Draw-Tite #76128 for your 2019 Honda CR-V because it is the only 2" trailer hitch that allows you to still use the hands-free liftgate feature. It is worth noting though that the sensors may have a little…

view full answer...

Answer 10

The lift gate feature on your 2022 Honda CR-V Touring Hybrid is blocked or obscured to the point you have to actively try to find the sweet spot where it still works with hitch receivers, like the etrailer Trailer Hitch Receiver - Custom Fit - Matte…

view full answer...

Answer 11

For your 2020 Honda CR-V I recommend the etrailer Trailer Hitch Receiver #e98848. Unfortunately, the location Honda chose for installation of the hands free tailgate sensor is one that will be blocked no matter what hitch you install. In order to…

view full answer...

Answer 12

Sometimes in shipping the hitches can get a few scratches or nicks on the surface. I would go ahead and hit them with some black spray paint, especially if you live up north and get snow and the salt that goes along with it. I attached an FAQ article…

view full answer...

Does the Receiver Extend 4-1/2" Past the Hitch Pin Hole Towards the Front of the 2021 Honda CR-V?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching