Will Curt Hitch Fit a 2022 Hyundai Kona Electric Model

Question

Question:

Will this fit a 2022 Hyundai Kona electric?

asked by: Peter B

0

Expert Reply:

Hey Peter, good to hear from you again!

Yes, the Curt Trailer Hitch Receiver # C98QV will fit the electric version of a 2022 Hyundai Kona so you'll be good to go!

expert reply by: Jon G

0

Robin H.

12/22/2025

Hey Peter, how did the Curt hitch fit on your Kona Electric? Your feedback could really help others looking for the same setup.

Answer 1

Hey Ryan, the Hollywood Racks E-Bike rack part #HLY84FR that you referenced would work great on your 2020 Hyundai Kona but you would need to have a hitch installed first like the Curt #C98QV. If you were wanting a really nice e-bike rack though I…

view full answer...

Answer 2

Hello Jody, I can definitely help with that! Does your 2018 Hyundai Kona already have a trailer hitch on it? If so, is it a 1-1/4" receiver, or a 2" receiver? Both options are available for the Kona, so please confirm what you have. If you…

view full answer...

Answer 3

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT52GR is a confirmed fit for your 2020 Hyundai Kona EV. The reason I say "should be" is because Draw-Tite does not specifically mention the EV as a fit, but they do say it fits "all…

view full answer...

Answer 5

Hi Natalie, Definitely smart to check, and the correct trailer hitch for your 2023 Hyundai Kona Limited is the Curt Trailer Hitch Receiver #C87DR. I went ahead and double-checked with the manufacturer for you just to make sure.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will Curt Hitch Fit a 2022 Hyundai Kona Electric Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching