Torque Specs for T3304 Rear TorkLift Camper Tie-Downs

Question

Question:

What torque values do the bolts on your frame mounted tie downs? I heard 50lbs on a video but that seemed high.

asked by: Fred G

0

Expert Reply:

Hey Fred, thanks for reaching out!

The hardware for the Rear TorkLift Camper Tie-Downs # TLT3304 need to be torqued to 75 ft-lbs according to my contact at TorkLift. If you're talking about a different kit please let me know.

expert reply by: Jon G

0

Fred

10/23/2024

50 felt ok on some bolts but excessive on the lower mounting bolts. 75 would snap the fasteners, only my feel after 50 years of wrenching. Guess I'll stick with 50 to be safe. It baffles me this torque number isn't in the instructions provided.

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Answer 4

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 5

Hey Kyle! What kind of camper do you have? There are camper tie-downs available for your 2006 Dodge Ram 3500 Dually. However, I will need to know what kind of hitch you have, along with running boards (none, cab length, wheel to wheel) to find the…

view full answer...

Answer 6

Hey, Daniel. Thanks for your question. We do have a weight distribution hitch that would work for your trailer and still use chains. That hitch is the Blue Ox SwayPro #BXW0350. The tongue weight rating needed for this system to work is between…

view full answer...

Answer 7

Hey Mark, yes we do have a version of the Andersen part #AN88VR with a 2-5/16 inch ball instead with the part #AN53VR. What does your trailer weigh?

view full answer...

Answer 8

Hey Delbert, thanks for reaching out! Yes, the Andersen Weight Distribution Hitch w Sway Control #AN53VR can be used for a lighter trailer like what you have. You'll just need to adjust the system to accommodate your weight and you'll be good…

view full answer...

Answer 9

Hello Josh, I completely understand where you are coming from. When you need long, equal-length turnbuckles to span about 35 inches on a 2022 F-350 with a Lance 1130, the goal is a setup that fits cleanly, installs easily, and stays secure without…

view full answer...

Answer 10

Yes, it does. The TorkLift Custom Fit Tie Down Kit Item #TL46VV does indeed include the Front item #TLD2101 and Rear item #TLD3109. These will fit your 2006 Dodge Ram 2500 so long as you do not have running boards that run past your cab. If you do…

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 12

Hey Wes, unfortunately it looks like the Hellwig Big Wig Rear Anti-Sway Bar #HE32RR is not intended to be used with Diesel engines so it's not going to work with your Dodge 2500. We do have a couple other options that don't say anything about…

view full answer...

Torque Specs for T3304 Rear TorkLift Camper Tie-Downs

Product Page this Question was Asked From

Continue Researching