Do I Need the TorkLift Camper Anchor Relocation Kit w/ a 2022 Ram 3500 8' Bed Dually?

Question

Question:

Do I need the A7004 dually bracket on a 2022 RAM 3500 dually with 8 foot bed? Mounting a HS-2902

asked by: Jim D

0

Expert Reply:

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item # TLA7004, you'll have to take a measurement.

You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor point. If it's less than 90" you will indeed need the Relocation Kit item # TLA7004. These are typically needed on 8' bed dually trucks.

If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.

expert reply by: Jerred H

0

Anchor Relocation Kit
(click to enlarge)

Jerred H.

3/4/2026

Hey Jim, were you able to take that measurement from your Palomino HS2902 to see if the relocation kit was needed on your Ram 3500? Knowing how that turned out could help others setting up similar campers.

Jim D.

4/5/2026

@JerredH I did not need it. I will have to pay for postage to return it which will cost a lot.

Jim D.

4/5/2026

Turns out I did NOT need this bracket on a 2022 3500 Tradesman Dually with 8 foot bed.

Answer 1

Hey Brian thanks for the information and congrats on the new truck. The TorkLift Tie Downs item #TL66PR are exactly what you'll need for your 2026 Ram 3500 Crew cab with a 8' bed and factory hitch. This set of front and rear tie downs are…

view full answer...

Answer 2

I spoke with Torklift about the TorkLift Camper Anchor Relocation Kit part #TLA7004 and they informed me that you could easily shorten the length if needed by simply overlapping the pieces of angle iron and then just drilling new holes to secure the…

view full answer...

Answer 3

Hey Kyle! What kind of camper do you have? There are camper tie-downs available for your 2006 Dodge Ram 3500 Dually. However, I will need to know what kind of hitch you have, along with running boards (none, cab length, wheel to wheel) to find the…

view full answer...

Answer 4

Hey John, thanks for the information. To add a class V hitch to your 2005 Dodge Ram 3500 you'll want the Curt item #C15409 for a 2" receiver or item #C15809 for a 2-1/2" receiver. This hitch fits all models of the 2005 Ram with or…

view full answer...

Answer 5

For your 2005 Dodge Ram Pickup, 3500 series Dually with 8 foot bed I suggest, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, #TLD3109 and Front, #TLD2101. The tie-down inserts can be easily removed from frame-mounted receiver brackets…

view full answer...

Answer 6

The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part #TLD2141 and #TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part #TLD1111-30. Since you have a dually you will also need to…

view full answer...

Answer 7

It sure will Jim but it will take some modification! The Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper item #TLA7900 requires a genuine Palomino Landing Pad bumper. The shaft may need to be shortened to seat properly.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Do I Need the TorkLift Camper Anchor Relocation Kit w/ a 2022 Ram 3500 8' Bed Dually?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching