How to Identify Replacement Hub for 1992 Four Winns Liberator 221
Updated 01/05/2026 | Published 09/08/2024
Products Featured in This Question
Question:
Hello . I need two hubs for my four wins trailer . I don’t know what’s the model . Can you help me please ? My boat it’s Four Wins Liberator 221 year 1992 Check the picture
asked by: João
(click to enlarge)
Expert Reply:
Hi João; we don't have a way to identify the hub on your 1992 Four Winns Liberator 221 without more information. Since you already pulled the hubs I would check the bearings for part numbers. You can also measure the inside diameter of the bearings with a digital caliper # PTW80157.
Once you have identified the bearings we can find the right hub for your trailer. If I had to guess, you have a 2,000 lb hub on there now. If you find that your inner and outer bearing are # L44649 with a 1.063" inner diameter you can use the # AKIHUB-545-2-LF-2K. If you have # L44643 inner and outer bearings with a 1.0" ID you can replace it with # AKIHUB-545-2-LFEZ-1K. If you have # L68149 inner (1.378" ID) and # L44649 outer bearings then it is a 3,500 lb axle so you can use # AKIHUB-545-35-EZ-K.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: seals trailer bearings races seals caps
- Search Results: trailer idler hub assembly
- Q&A: Looking for Hub to Replace TDE 11033
- Q&A: Hubs for 1" Straight Spindle With 5 on 4-1/2 Bolt Pattern Using 13" Wheels.
- Q&A: Looking For Replacement Hubs For Older Shorelander Trailer
- Search Results: st205/75d15
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Suspension Enhancement
- Q&A: What Are the Differences Between the Timbren Suspension Enhancement Systems on a 2022 Ford F-150 4wd
- Q&A: Recommended Rear Suspension Enhancement System for Occasional Towing with 2020 Ford F-150
- Q&A: 2020 Ford F-150 4x4 Timbren Kit Recommendation for Towing a 7K Trailer
- Search Results: hub dust cap
Robin H.
1/5/2026
Hey João, were you able to check the bearing numbers or measure them with a caliper for your Four Winns trailer hubs? Knowing which bearings you have will make it easier to match the right hub. Your update could really help others working on older boat trailers too.