Will Timbrens Work With Weight Distribution Hitch on 2019 Ford F-150

Question

Question:

Will this be of any use if I already have a weight distribution hitch that I use for pulling my travel trailer with my F150? It seems to keep the bed from sagging but will this help with stability as well?

asked by: Jon M

1

Helpful Expert Reply:

Yes; when using a weight distribution hitch while towing with your 2019 Ford F-150, using the Timbren Rear Suspension Enhancement System # TFR1504E will help with stability.

The weight distribution will help with leveling, but the Timbrens are going to offer added stability like you mentioned, so they'll help with body roll as you're towing. Timbrens and weight distribution is a pretty common pairing so you can definitely use the # TFR1504E.

expert reply by: Kyle S

1

Answer 1

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part #TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs so…

view full answer...

Answer 2

The rear suspension enhancement system I highly recommend for your 2020 Ford F-150 is the Timbren Rear Suspension Enhancement System #TFR1504E because these jounce springs will improve your truck's handling and performance, offering your…

view full answer...

Answer 3

The best option we can offer to help cut down on excessive bounce while towing is with the SumoSprings Solo Custom Helper Springs part #SSR-117-47. The SumoSprings will do a great job of helping to reduce road shock while towing or hauling. They…

view full answer...

Answer 4

Hey Dave, The Timbren Rear Suspension Enhancement System #TFR1504E you referenced is a fit for your F-150, but it has a 6,000lb capacity so it'll give you an terrible ride unloaded ride quality. These would be great if you're heavy hauling…

view full answer...

Answer 5

The main difference between SumoSprings part #SSR-117-47 and Timbrens part #TFR1504E for a 2017 Ford F-150 is ride quality and support. The Timbrens are stiffer so they provide more support but this also means there is not as much give so the ride…

view full answer...

Answer 6

The difference in the Timbrens for your 2023 Ford F-150 is that the #TFRTT1504E is very stiff and designed only for things like trucks that have a salt spreader or truck bed camper on them - basically if there is constant weight on the suspension.…

view full answer...

Answer 7

To install the 7-1/2 Inch Round Butterfly Vent, #371800, you will need to drill or cut a hole in your trailer that is 5-7/8 inches diameter to no more than 6 inches diameter. If you have access to a hole saw this size for a drill the wold be the…

view full answer...

Answer 8

Hey Sam! There are hubs that will work with those wheels. The first thing I would do is confirm the bearings for your spindle. Did you measure the spindle with a digital caliper? The bearings could be #L44643 which have a 1.00" inner diameter…

view full answer...

Answer 9

Hello Stephen, thanks for reaching out. We do carry 5 on 4-1/2" idler hubs for a L44649 straight spindle. Take a look at the following: - Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased…

view full answer...

Answer 10

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Answer 11

Hi João; we don't have a way to identify the hub on your 1992 Four Winns Liberator 221 without more information. Since you already pulled the hubs I would check the bearings for part numbers. You can also measure the inside diameter of the…

view full answer...

Answer 12

While the Timbren Rear Suspension Enhancement System #TFR1504E may be able to technically fit without using the spacer, it will likely not offer you the best performance. It is supposed to be pretty tight and without the use of the spacer, the…

view full answer...

Will Timbrens Work With Weight Distribution Hitch on 2019 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching