Looking For Replacement Hubs For Older Shorelander Trailer
Updated 12/01/2025 | Published 11/04/2025
Products Featured in This Question
Question:
Hello trying to find the correct replacement hubs for my older Shorelander trailer - bearing that came off trailer was L44649r / 5x4.5 lug pattern that runs a 14 inch tire - I don’t believe the spindles have any tapper , my Boat is a 16 foot aluminum so not Very heavy - the tags are missing from trailer . I have photos I could send as well . Thanks for any info
asked by: Stephen K
Expert Reply:
Hello Stephen, thanks for reaching out. We do carry 5 on 4-1/2" idler hubs for a L44649 straight spindle. Take a look at the following:
- Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-2K
The L44649 straight spindles are typically used on light duty axles rated for 2,000 or 2,200 lbs. The hub comes with pre-greased bearings, races, grease seal, lug nuts and grease cap. It will be compatible with the 14" wheels. The seal is a 1.50" ID.
One thing to keep in mind is a some older trailers use "short" hubs that are now obsolete. The # AKIHUB-545-2-LF-2K hub is about 4-1/4" long overall so please make sure this matches what you have currently. As long as all the specs I listed match up, you can be sure the new hub will work.
(click to enlarge)
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: seals trailer bearings races seals caps
- Search Results: trailer bearings races seals caps
- Search Results: trailer idler hub assembly
- Q&A: Hubs for 1" Straight Spindle With 5 on 4-1/2 Bolt Pattern Using 13" Wheels.
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Identify Replacement Hub for 1992 Four Winns Liberator 221
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Weight Distribution System for Quick Breakdown and Set up on a 6,000 lbs Trailer
- Q&A: What Are the Differences Between the Timbren Suspension Enhancement Systems on a 2022 Ford F-150 4wd
- Q&A: Recommended Rear Suspension Enhancement System for Occasional Towing with 2020 Ford F-150
- Q&A: Best Way to Stop Trailer Sway for 2016 Ford F-150 Towing 9,000 lb Trailer
Jesse M.
12/1/2025
Hey Stephen, did the 5 on 4-1/2 idler hub end up matching your Shorelander trailer’s straight spindle? Knowing how the fit turned out could really help others working with older light-duty trailers.