Replacement Spine and Wheel Trays for Yakima HoldUp EVO Bike Carriers

Question

Question:

Hi: I was looking at Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Black Part Number: 8890280 and I noticed that in the text of the video, it says this part isnt for HoldUp Evo models. Do you stock the equivalent part for the HoldUp Evo?

asked by: Mike H

0

Expert Reply:

No, I am sorry Mike we do not. The closest thing we have for the Yakima HoldUp EVO item # Y02480 are the Replacement Spine and Front Wheel Tray item # Y32AR and the Rear item # 8880828.

expert reply by: Jerred H

0

Jerred H.

1/12/2026

Hey Mike, did the replacement spine and front wheel tray for the HoldUp EVO end up working for your rack? Knowing what fit could help others trying to replace parts on the same setup.

Mike H.

1/12/2026

@JerredH. Worked great!

Jerred H.

1/12/2026

@MikeH Happy to hear that!

Answer 1

The model number for a Yakima HoldUp bike rack like item #Y02443 will be on the rear side of the front cradle facing away from the vehicle as shown in the picture below. If you have a black Yakima HoldUp bike rack or the 2-bike add on item #Y02446…

view full answer...

Answer 2

It looks like you have the standard version, the Yakima HoldUp #Y02443. The replacement front arm #8880833 is only for the HoldUp EVO #Y02479 bike rack. You are correct that in your case, you will need to replace the entire front wheel assembly…

view full answer...

Answer 3

We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not…

view full answer...

Answer 4

Hi John; the step on the Benton LittleShift Bike Rack #B54VR does not have a specific weight rating. It is capable of holding the max tongue weight capacity of your hitch so most adults will be able to use it for sitting/standing. We also have a…

view full answer...

Answer 5

I have a solution for adding turn signals to your Yakima Holdup part #Y02443 but it will require you to drill the cross tube of the rack which Yakima is not going to care for. What you need is the light kit part #98174LED which will plug into a 4-way…

view full answer...

Answer 6

I did some research and it appears that the numbers you gave go to the Yakima HoldUp Bike Rack for 2 Bikes #Y02443. With that being said, since you're needing to replace a broken arm you are actually going to need to replace the entire wheel…

view full answer...

Answer 7

To convert a Yakima Holdup bike rack designed for a 2 inch hitch to fit a 1-1/4 inch hitch you'd want the part #8880581 and you'd be set.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Spine and Wheel Trays for Yakima HoldUp EVO Bike Carriers

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching