Pictures of Timbren Installation on 2022 Ford F-150 XLT

Question

Question:

Hello, do you have pictures of the timbren installed on a 2022 f150 4 by 4 xlt front suspension and rear suspension?

asked by: Richard T

0

Expert Reply:

The only pictures we have for the F-150 are of the Timbren Rear Suspension Enhancement System # TFR1504E. I'm not sure if any are specifically the XLT but it should all be the same. You can find the pictures on the product page under "In Use/Installed" and "Customer Photos." We also have an installation video which I attached below.

The closest thing we have to pictures for the Timbren Front Suspension Enhancement System # T57SR is the diagram in the instructions. I also attached the instructions for this system below for your reference.

expert reply by: Robin H

0

Timbren SES on 2020 F-150
(click to enlarge)

Answer 1

Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part #SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?

view full answer...

Answer 2

Hey there Steve; thanks for writing in and when it comes to body roll and sway for your 2018 Ford F-150, the better option is the RoadActive Suspension Custom Leaf Spring Enhancement Kit, with the right one depending on if your F-150 is 2WD or 4WD: -…

view full answer...

Answer 3

Sorry, William but you can not use a weight distribution hitch with a folding tongue even if you use a Pole-Tongue adapter like item #EQ95-01-5950. That hinge in your MagicTilt Trailer's tongue won't support the stress put on it by a weight…

view full answer...

Answer 4

Hello Warren, The Vitrifrigo #VT79FR is a fantastic pick for a box van kitchen because it’s compact, efficient, and designed with mobile living in mind. It gives you 2.6 cubic feet of storage space (enough for a good amount of fresh food, drinks, and…

view full answer...

Answer 5

Hey Keith, 3-4 inches of sag when your trailer is hooked up is quite a bit. That makes me think your weight distribution system is not properly rated for the tongue weight of your trailer, your trailer is much heavier than what your truck is rated…

view full answer...

Answer 6

Yes, the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 will work for your trailer since the dimensions match with your current equalizers. These will work with axles up to 6,000lbs. I believe the kit…

view full answer...

Answer 7

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 8

You can fit the #C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to…

view full answer...

Answer 9

There isn't much of a difference between the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR and the Curt Front Mount Trailer Hitch Receiver #C31089 since they both have the exact same line pull and vertical load capacities. Even though they…

view full answer...

Answer 10

We don't carry either disc included with the RAS kit, part #RAS3611-Y, as replacement parts, however you can find both of them almost anywhere for only 35 cents. According to my contact at RoadActive Suspension you can use a quarter to replace…

view full answer...

Pictures of Timbren Installation on 2022 Ford F-150 XLT

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching