Shackles are Hitting Trailer Frame
Updated 10/23/2020 | Published 10/21/2020 >
Question:
I have a problem with the shackles hitting the frame. have attached pictures, There is a 1/2 inch clearance empty, and a hair with a car on. I would appreciate any help. Thank you
asked by: Barry S
Expert Reply:
The best thing to do in this situation, because you have such little clearance, even with an empty trailer, is to replace your equalizers with taller ones. To pick out a compatible replacement equalizer you'll need to measure the distance between the two lower holes on your current equalizers, along with the distance between the top and bottom holes to make sure you get the correct size.
For example, the Curved Equalizer for 1-3/4" Wide Double-Eye Springs # TREQE34 measures 7-3/4" between the two lower holes and is 2-7/8" tall.
I have added a link below to our entire selection of equalizers for you to take a look at as well.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Video: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs Review
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Q&A: Replacement Suspension for a 2012 Keystone Outback 210 RS
- Q&A: Correct Replacement for 26-1/2 Long Leaf Spring
- Video: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles Review
- Video: A Closer Look at the U-Bolt Plate for 2" Square Axle
- Shop: CE Smith Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - Galvanized
- Shop: 2" Square Trailer U-Bolt (Qty 2)
- Shop: Replacement Shackle Strap - 2-1/4" Long - Galvanized
- Shop: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles - 26" Long - Dacromet
- Article: Where to Position the Trailer Axle?
- Search Results: bushing
- Search Results: nylon bushing
- Shop: U-Bolt Plate for 2" Square Axle - 1-3/4", 2" Springs - 9/16" Bolts
- Q&A: Why Are Shackle Straps Hitting Frame When Re-Building Trailer Suspension
- Q&A: Should Trailer Leaf Spring Suspension have the Shackles Straps Angled or Totally Vertical
- Shop: CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized
- Video: An In-Depth Look at the Curved Equalizer for 1-3/4" Wide Double-Eye Springs
- Video: Hands-On with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track
- Search Results: equalizer
- Search Results: equalizer kits
- Search Results: eq e34
- Search Results: trailer suspension parts
- Q&A: Suspension Enhancement For A Trailer With 8,000 Pound Axles
- Q&A: What Is The Difference Between TREQE1 And A2252CB-GALV?
- Q&A: Are the BP01-301 Brake Magnets the Same as BP01-330 Brake Magnets?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs



