Replacement Bearing Kit, Brakes and Hubs For a Lippert LCI35 Axle On Pop Up Camper
Updated 02/17/2026 | Published 06/22/2024
Products Featured in This Question
Question:
Hi can you direct me to the correct bearing set for my pop up trailer. The bearings identification are not visible. I included a picture with the axle identification Thank you!
asked by: Hector R
(click to enlarge)
(click to enlarge)
Expert Reply:
Thank you for providing your axle tag and the tag for the brakes on your pop up camper Hector. You are going to need the Bearing Kit # BK2-100 or Timken Bearing Kit # TMK52VR should you want the higher quality bearings. Each kit is for one hub so you will need to order 2 for your axle.
Should you need to replace your brakes I recommend upgrading to the Self-Adjusting # AKEBRK-35-SA which includes both the left and right assemblies for one axle. We do have the Shoe and Lining Kit # AKBRKR-S-10 for each of your Brakes # AKEBRK-35 if they are worn and you prefer to just replace them. We also have the Hub/Drum # AKHD-655-35-EZ-K should yours be worn past their serviceable limit or just need replaced.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Seal Puller
- Q&A: Replacement Bearing Kit for a Lippert 3,500 lbs Axle
- Q&A: Correct Bearings for LCI35 Lippert 3,000 Lb Trailer Axle
- Q&A: Replacement Wheel Bearings and Grease Seal For Lippert LCI35 Axle Under 2018 Jayco Jay Flight SLX 14
- Q&A: Replacement Hub for Trailer with 84 Spindle Dimensions
- Shop: Fold Down Door Holders for RV Entry Door - 1/4" - Qty 2
- Shop: Fold Down Door Holders for RV Entry Door - 1/2" - Qty 2
- Video: What to Know About the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Search Results: wheel blocks
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Search Results: brake shoes
- Q&A: Replacement Bearings and Grease Seal for Lippert Axle LCI35-SB-67.62-53.0-NOSP-US-L-545-7213
- Q&A: Recommended Bearing Kit For # 84 Spindle
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Video: Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake Review
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Fold Down Door Holders for RV Entry Door: The Breakdown
- Video: Let’s Check Out the Fold Down Door Holders for RV Entry Door
- Search Results: rv leveling blocks
- Search Results: rv door parts
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
Jenny N.
2/17/2026
Hey Hector, how did things go with the bearing kit for your pop up camper? Did the BK2-100 or the Timken kit end up being the right match for your axle? Your update could make it easier for the next person with the same setup.