Replacement Bearings and Grease Seal for Lippert Axle LCI35-SB-67.62-53.0-NOSP-US-L-545-7213

Updated 07/20/2025 | Published 06/24/2025

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2907)

$15.39

Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(274)

$51.73

Question:

Im looking for the correct bearings and seals for my lippert Axel. On the sticker it says Lippert LCI35-SB-67.62-53.0-NOSP-US-L-545-7213 GWAR: 2200 LBS

asked by: Ryan G

Expert Reply:

Hey Ryan! I sent that information to Lippert and despite the weight rating of 2,200 lbs it has a 3,500 lb axle spindle. I thought that was the case since LCI35 indicates 3,500 lbs but usually the axle rating isn't that much lower. Based on this information the correct replacement bearings are the # BK2-100 or if you want the Timken version # TMK52VR.

What kind of trailer do you have?

expert reply by: Robin H

Timken Bearing Kit
(click to enlarge)

Ryan G.

6/24/2025

It’s a pop up camper. Thank you for the information. Could you also tell me the correct grease seals?

Robin H.

6/24/2025

@RyanG the grease seal is included in both bearings kits. They're commonly listed as 10-19 grease seals which you can find under # RG06-050 if you want an extra set.

Ryan G.

7/19/2025

@RobinH I got those seals and they are way too large. I pulled the hub apart and got the seal out. It has no markings on it. It is 1.5” ID 1.9375 OD. Any idea what the correct grease seal is?

Robin H.

7/20/2025

@RyanG that is surprising since the parts came straight from Lippert based on your axle tag. I'm sorry about that. The closest thing is the # 10-9 with an ID of 1.500" and OD of 1.987".