How to Keep Aluminum Bed Trailer From Touching Erickson Tie-Down Kit

Question

Question:

What would I need to mount these on aluminum bed trailer?

asked by: Gary

0

Expert Reply:

Hey Gary, thanks for reaching out!

The best way to keep the Erickson ATV E Track Tie-Down Kit # EM98CV from corroding is to use a type of spacer, like polypropylene tape, to keep the metals from touching.

expert reply by: Jon G

0

Gary

6/17/2024

Would I need a backer plate or anything so won't pull through deck or should it be OK? If I need something is that something you sell?

Jon G.

6/17/2024

@Gary It wouldn't be a bad idea to put a backing plate on it, but that's something we unfortunately don't have.

Answer 1

The mounting holes on the E-Track such as #E19147 are 1/4 inch in diameter. The type and length fastener you should use will depend on the surface material and thickness you are attaching it to. For example, if the surface was ACQ treated wood you…

view full answer...

Answer 2

You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part #EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will work for most…

view full answer...

Answer 3

You can certainly still use the black powder coated E-Track on a trailer with an aluminum deck. You will want to put a layer between the E-Track and the aluminum of your trailer, to help prevent corrosion from contact of dissimilar metals. This layer…

view full answer...

Answer 4

E-track can be driven over and it will be fine. It would not collapse or otherwise damage itself. You could use and drive over the Erickson Horizontal E-Track #EM19147. Then for a wheel strap the Erickson E-Track Wheel Tie-Down Strap with Roller…

view full answer...

Answer 5

Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…

view full answer...

Answer 6

Hey George! Assuming you're looking for a complete kit, the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM98CV you were looking at covers just about everything. This is compatible with 10" - 30" diameter tires,…

view full answer...

Answer 7

The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…

view full answer...

Answer 8

The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit #EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your mounting surface is no more…

view full answer...

Answer 9

Hi Rick, I'm so sorry that happened with your ATV, it sounds really scary! To secure it to your tilt trailer and keep that from happening again, the etrailer E Track Wheel Tie Down Straps w/Roller Idlers part #e64PR you were looking at will do…

view full answer...

Answer 10

Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…

view full answer...

Answer 11

Hello Fred, thanks for getting in touch. The Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM98CV will work great for securing your Kubota RTV1100C. Those weight about 2,300 lbs or so, and the tie down kit comes with 4 straps…

view full answer...

How to Keep Aluminum Bed Trailer From Touching Erickson Tie-Down Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching