Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These steel backing plates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.
Features:
Specs:
Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These backing plates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area. This prevents your mower, ATV, or other heavy object from pulling your E-track away from its mounting surface and tearing up your trailer's wall or floor. They're perfect for trailers with thin walls or floors.
Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors.
To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced. Place your E-track where you're mounting it and insert the included bolts. On the opposite side of your wall or floor, place the plates over the bolts and secure them using the included washers and nylon lock nuts.
Ratings & Reviews
Great product & even better service
Worked great very easy to install.
Box was bet up but thanks for putting the parts in a strong baggie.
Great customer service! You can tell from employees that people care at this company.
Nice product
Very pleased! Product was shipped promptly and I received exactly what I ordered. Thank you!
Product works as described. Perfect for what I needed.
Exactly what I needed. Great having all the hardware.
the best way to add support, strength and secure your e-track.
Backing plates worked perfectly and bolts were long enough to go through a 1 1/2 board
The backers were substantial and provided a solid base for our winch and other attachments made to the inside of the trailer, would strongly recommend
What I like the best is your customer service. I was missing 1 backing plate in my order, I called and talked to Adam and he got me taken care of ASAP.
Everything else was exactly as advertised on your website.
I really appreciate your instructional videos.
I have come to expect the very best from your products and will order again.
Used them across the i-beams of my aluminum trailer and they worked great.
Product is as described and did the job it was designed for. Shipping was excellent and will definitely buy from here again!
Easy to install and provides e-track support between trailer frame cross members.
You guys are great! Always seem to have just what I need, easy to navigate website, great customer service, lots of "How to" videos, and exceptional shipping department that jumps on it and gets me the product in near no time.
This is the only way to go with a "thin" plywood floor! You could buy another e-track rail and chop it into backing plates, but then you don't have the hardware to go with it which gets pretty pricy.
These E-tracks installed relatively easily on my new trailer using the available backing plates. Total install of 18' of track took less than 4 hours - a one man job except for the final tightening of the bolts included in the backing plate kit.
I have had these installed on my utility trailer for a year. They were easy to install and do an excellent job holding my e-track and 1000 lb bike down. Well worth the price and the peace of mind knowing I am not just relying on some screws.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Ron
10/13/2022
Working as expected. No problems