See what our Experts say about this Erickson ATV-UTV Tie Downs

• How to Keep Aluminum Bed Trailer From Touching Erickson Tie-Down Kit
  Hey Gary, thanks for reaching out! The best way to keep the Erickson ATV E Track Tie-Down Kit # EM98CV from corroding is to use a type of spacer, like polypropylene tape, to keep the metals from touching.
  view full answer...
• Side-By-Side Tie-Down Options for 6x10 Trailer with Wood Floor
  Hey Tom, thanks for reaching out! You'll need 4 of the etrailer Horizontal E Track # e75VR as well as the etrailer E-Track Backing Plates w/ Hardware # e66RR, and a tie-down kit like the etrailer # e96HR. Another option is to use the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV which doesn't take up as much room and is more cost-effective, but it does limit how you can use the rails since they are basically just chocks.
  view full answer...
• Is There UTV Tire Strap Setup that Can Fit 32 inch Diameter Tire
  Hey Lina, we have the Caliber Trailblazer ATV/UTV tie down kit part # CA84AJ that can fit tire diameters that are between 25 and 35 inches. What UTV do you have? In a comment below a customer of ours was able to use the part # EM98CV as well although it's not listed as compatible with that tire size.
  view full answer...
• Do I Have To use All Bolt Holes of E-Track ATV Tie Down Kit
  Hey Carl, if you used just the 4 bolts per backing plate of the etrailer E-Track Backing Plates w/ Hardware # e66RR with the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV you would be fine. If you wanted to get more and run all 6 there wouldn't be any issues but a lot of that comes down to what the floor material is. With etrack if you are running the tracks directly to a wood floor with no backing plate we recommend using every mounting hole possible. If...
  view full answer...
• Recommended Parts Needed to Secure Side-By-Side to Wood Trailer Floor
  Thanks for reaching out, Tom! I recommend picking up some of the 4' sections of etrailer Horizontal E Track # e85VR and securing them to your wood floor with the etrailer E-Track Backing Plates w/ Hardware # e66RR. Then you can use the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV to secure the side by side to the E Track.
  view full answer...
• E Track Tie-Down Kit For Kubota RTV1100C
  Hello Fred, thanks for getting in touch. The Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV will work great for securing your Kubota RTV1100C. Those weight about 2,300 lbs or so, and the tie down kit comes with 4 straps and each strap has a 1,500 lb working load limit. With four of these straps you are going to have more than enough capacity so secure your UTV.
  view full answer...
• Erickson ATV E Track Tie-Down Kit EM98CV - Can I By An Extra Set Of Chocks?
  Hey Steve, thanks for reaching out. So we do offer the # EM98CV kit as a half set, part # EM09160 which comes with 4 chocks and two straps. The chock pieces are not available by themselves, so getting an additional half kit will be your best bet here. You would have a few extra straps, but it doesn't hurt to have a spare I guess.
  view full answer...
• Recommended Hardware for Erickson ATV E-Track Tie-Down Kit
  The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit # EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your mounting surface is no more than 2" thick I would consider using the etrailer E-Track Backing Plates w/ Hardware # e66RR to keep your wheel chocks secure.
  view full answer...
• What Size Bolts Do I Need For The Erickson ATV E-Track Tie-Down Kit
  You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part # EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will work for most applications. I have included a video demo link below.
  view full answer...
• Mounting Erickson ATV E-Track Tie-Down Kit to Plywood Floor in Enclosed Trailer
  One nice thing about the # EM98CV is you can use a variety of mounting hardware to suit your needs depending on where and what you're mounting them to. You can certainly use lag bolts to mount the wheel chocks to your plywood floor, this won't cause a problem. However, if you decide you want to get under your trailer to mount them, the best way to mount these is with the etrailer E-Track Backing Plates # e66RR.
  view full answer...
• Why Are The Erickson Ratchet Straps EM98CV Falling Off My Tires
  If the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV are all coming loose, there is definitely something odd going on. First thing you will need to check is the release levers. You will need to make sure they are not staying in the release position once everything is tightened down. If they are, it would definitely explain why they are coming loose. This should also be pretty apparent as when you are lifting the ratchet handle, it should not be clicking...
  view full answer...
• Will Erickson ATV E-Track Tie-Downs EM98CV Be Able To Secure 2006 Kawasaki Mule 3010?
  Yes, the Erickson ATV E-Track Tie-Downs # EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010 weighs in right around 1500lbs this would be a perfect option for you. I do recommend adding two sets of the Backing Plates # e66RR to better distribute the clamping force of the bolts holding the e-tracks to the trailer. I included videos of the products...
  view full answer...
• Can The Wheel Chocks Be Driven Over In The Erickson ATV E-Track Tie-Down Kit # EM98CV?
  The chocks of the Erickson ATV E-Track Tie-Down Kit # EM98CV are designed to be driven over as they are bolted to the floor.
  view full answer...
• Recommended Ratchet Straps and Wheel Chock Kit for Hauling a Golf Cart
  Yes, the Erickson ATV E-Track Tie-Down Kit item # EM98CV will definitely work for a gold cart. These have a 1,500 lbs capacity and use four ratcheting straps to secure tires to the deck of a trailer. I have linked a review video below.
  view full answer...
• Width Distance of Erickson Wheel Chock Kit Mounting Holes
  The distance between the mounting holes of the Erickson wheel chock kit part # EM98CV from left to right on center are 4-1/2 inches.
  view full answer...
• Can the Strap from the Erickson ATV E-Track Tie-Down Kit Be Purchased Separate
  Yes, we do offer the straps from the Erickson ATV E-Track Tie-Down Kit separately. I have listed these for you below, they vary by length. 12' - part # EM59136 16' - part # EM59139 20' - part # EM59140
  view full answer...
• Safe Working Load Limit of Erickson ATV E-Track Tie-Down Kit 4 Wheel Set
  The 1,500 lb safe working load limit of the # EM98CV is per pair of straps. This is the same as two of the # EM09160. Since this has two pair, the WLL would become 3,000 lbs. As long as you are not exceeding 3,000 lbs these are a great choice for your application. I also highly recommend the etrailer E-Track Backing Plates w/ Hardware # e66RR to keep them secure.
  view full answer...
• E-Track Parts to Secure Side By Sides and Dirt Bikes
  You can install the etrailer Horizontal E-Track # e62VR and drive over it just fine with a vehicle as the tracks only sit 1/2" tall - then you can secure your side by sides with a tie-down kit like part # EM98CV you were looking at. To secure the front wheel of your dirt bikes I recommend picking up a few of the CargoSmart Motorcycle Wheel Chock # 3481731 as well as a few of the single E-Track connections # SLSZ since the wheel chock connection points won't be as far apart as what you'll...
  view full answer...
• ATV/UTV Wheel Tie Downs That Are Made In The USA
  While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made in the USA. For straps we have the Snap-Loc E-Track Tie-Down Strap # SLLS28RER. These 2" wide by 8' long straps have a safe working load of 1,467lbs each. You can attach the straps to the Stainless Steel Snap-Loc E-Track Tie-Down Anchor # SLSS which is also Made in the USA and the stainless steel construction will outlast other anchors...
  view full answer...
• Availability of E-Chock Wheel Chocks and E-Track Strap for Honda SXS With 32 Inch Tires
  While we do have separate E-Chocks available like the # EM09162, they require E-Track rails like the # e65VR. Unfortunately, the E-chocks with the E-track slots are only available with the # EM98CV tie-down kit. There is also no way to substitute the straps in the kit. We do have longer straps available like the Erickson E-Track Strap with Ratchet # EM59136. This strap is 12' long x 2" wide and has a safe working load limit of 1,165 lbs.
  view full answer...
• Will Single Strap of Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Chocks be Adequate
  As long as you place the chocks of the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV in the right location so that the tires are centered for where the straps will attach they will work really well and you would not have to worry about them slipping off. Once you tighten the strap down it will secure the tire and have enough vertical tension that it would not slip off. The ATV and SXS tires are flat enough that there is basically no risk of a strap coming...
  view full answer...
• Wheel Chock Tie Down Kit that Can be Used for Securing Lawn Mower
  You could use an ATV e-track tie down wheel chock setup like the Erickson part # EM98CV on the wheel of your lawn mower and it would do a great job securing it in your trailer.
  view full answer...
• E-Track ATV Wheel Chock for Securing ATVs in Trailer
  We don't have any E-track ratchet straps that are as short as you are wanting but I have a different solution that I think you would like with the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV. You'd mount these on your trailer floor in the same direction as your two ATVs so that you can secure them by just the tires.
  view full answer...

Do you have a question about this ATV-UTV Tie Down?