Erickson ATV E Track Tie-Downs For ATV With Backing Plates
Updated 05/06/2026 | Published 05/02/2026 >
Products Featured in This Question
Question:
Im interested in the Erickson tie downs for my atv along with backing plates, but am not sure of size to buy.
asked by: George G
Expert Reply:
Hey George! Assuming you're looking for a complete kit, the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV you were looking at covers just about everything. This is compatible with 10" - 30" diameter tires, and comes with everything you need aside from the hardware and backing plates. For the backing plates you can use the etrailer E-Track Backing Plates w/ Hardware # e66RR.
What kind of ATV do you have and where do you typically ride?

Raymond
5/6/2026
You don't really need four unless you want all four I use two on my Honda Rancher 420 4x4 on my trailer holds in place no movement I do the front left wheel and the right rear wheel and have never had any problems

Joseph L.
5/6/2026
I have Polaris XP 1000 crew cab. Usually run between Louisiana and NC regularly. Have used the Erickson ATV E track for 3 years. I use all 4 for safety although 2 would probably be OK. Fastest method I could find to secure my UTV. I can secure all 4 tires in about 5 minutes. I highly recommend using this!
Product Page this Question was Asked From
Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set
- ATV-UTV Tie Downs
- E Track Ends
- 4 Straps
- Manual
- 6 - 10 Feet Long
- E-Track Strap
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Continue Researching
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Do I Have To use All Bolt Holes of E-Track ATV Tie Down Kit
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Q&A: Recommended Hardware for Erickson ATV E-Track Tie-Down Kit
- Q&A: E Track Tie-Down Kit For Kubota RTV1100C
- Q&A: Looking for Spare Carrier for Wood Rail Trailer
- Q&A: How Does The Brophy Angled Motorcycle Wheel Chock BR26MJ Mount?
- Q&A: Tie Downs for a 4-seat Polaris RZR
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



George G.
5/5/2026
Hi Robin, thanks for the reply. My machine is a Polaris General 1000 (2021). I live in Mesquite, NV, 80 miles NE of Las Vegas, so I'm riding in the desert on old minimg and ranch roads.